Features:
- 24 Port 380W 10/100/1000 Mbps PoE switch
-
Out of stock
-
Out of stock
Features:
- Protects equipment from high voltage surges from nearby lightning strikes.
- Perfect for Network, PC modem, server…etc
- Protects UTP Twisted Pair products or any computer equipment with networking cable.
- Four pairs protection for wide range of applications: CCTV system, video camera, monitors, multiplexers & Quad processor, VCR, etc.
-
Out of stock
Features:
- Performs a different function than grounding requirements.
- Protects equipment from high voltage surges from nearby lightning strikes.
- RJ45 Jack to RJ45 Jack.
- Power and signal line protection.
- 10/100 Base-T CAT5e/CAT5e compatible.
- Support Mid-Span PoE and End Span PoE.
- 802.3af and 802.3at PoE (Power over Ethernet) compatible.
- Application for PoE (Power over Ethernet) protection.
-
Out of stock
Features:
- Protects equipment from high voltage surges from nearby lightning strikes.
- Special design to protect high data rate network equipments, especially on HDBaseT CAT5e extender or any computer equipments work with network.
- Support the bandwidth data rate up to 10Gb/s (Max).
- Built in ESD and lightning protection.
- Complaint IEC61000-4-2, IEC61000-4-5, IEC1000-4-5.
- Four pairs protection for wide range of applications: Any TCP/IP Devices, Network, switch hub, PC modem, server, CCTV SYSTEM, IP camera…etc
-
Out of stock
Features:
- 16 x RJ45 Jack to 16x RJ45 Jack.
- Application for 16 channel POE hub (Power over Ethernet) protection.
- 10/100/1000 Base-T CAT5e/CAT5e compatible.
- Support Mid-Span POE and End Span POE.
- 802.3af POE compatible.
-
Out of stock
Features:
- To send HD-SDI video, RS485 data and camera power over one coaxial cable.
- Allow to use existing RG59 coax cable to upgrade the HD-SDI camera from analog camera.
- Transmission distance up to 300 meters over RG6U cable
- Built in RS485 data, application for PTZ camera one way data transmission, transmission speed up to 57600bps.
- SDIVPR receiver power input support: DC12V to DC58V
- SDIVPT transmitter and camera power from receiver unit.
- SDIVPT support camera power up to DC12V/1Amp.
- POC built in two class surge protection: class I 2KA (8/20uS) , class II 2A (8/20uS)
- SDI output/input built in 2A 2KA (8/20uS) surge protection
- Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
- Support video signal 720p, 1080i, 1080p.
-
Out of stock
Features:
- To send HD-SDI video, RS485 data and camera power over one coaxial cable.
- Allow to use existing RG59 coax cable to upgrade the HD-SDI camera from analog camera.
- Transmission distance up to 300 meters over RG6U cable
- Built in RS485 data, application for PTZ camera one way data transmission, transmission speed up to 57600bps.
- SDIVPR receiver power input support: DC12V to DC58V
- SDIVPT transmitter and camera power from receiver unit.
- SDIVPT support camera power up to DC12V/1Amp.
- POC built in two class surge protection: class I 2KA (8/20uS) , class II 2A (8/20uS)
- SDI output/input built in 2A 2KA (8/20uS) surge protection
- Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
- Support video signal 720p, 1080i, 1080p.
-
Out of stock
Features:
- BNC male to BNC female.
- Provide protection for HD CCTV, broadcasting devices.
- SDI transmission rate: 270M ~ 2.97G.
- Resisting Surge：8KV (Max).
- Discharging Current：10KA (Max).
- Reaction Speed：<1nS.
-
Out of stock
Features:
- Extend and distribute HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
- Supports resolutions up to 1080p 60Hz FullHD.
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR extension.
- HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
- HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
- Option Model: 1U 19” Rack Mounting Panel TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
-
Out of stock
Features:
- Extend and distribute 4K HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
- Supports resolutions up to 1080p 60Hz FullHD.
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR extension.
- HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
- HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
- Option Model: 1U 19” Rack Mounting Panel TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
-
Out of stock
Features:
- Extend and distribute VGA or DVI signal with USB, bi-directional RS232/IR(Infrared), and analog audio signals over LAN.
- Supports resolutions up to 1920 x 1200 60Hz (Max)
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR(Infrared) remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR(Infrared) extension.
- VDKM02BT Transmitter unit built in HDMI local loop output.
- VDKM02BR Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
-
Out of stock
Features:
- Extend and distribute VGA or DVI signal with USB, bi-directional RS232/IR(Infrared), and analog audio signals over LAN.
- Supports resolutions up to 1920 x 1200 60Hz (Max)
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR(Infrared) remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR(Infrared) extension.
- VDKM02BT Transmitter unit built in HDMI local loop output.
- VDKM02BR Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
-
Out of stock
Features:
- 1U Rack Panel For 2 pieces HKM02BT-4K Transmitter
-
Out of stock
Features:
- 1U Rack Panel For 3 pieces HKM02BT Transmitter
-
Out of stock
Features:
- 1U Rack Panel Option for insert 2 x VDKM02BT
-
Out of stock
Features:
- 10 AMP Eight port power supply, AC120V/230V to DC5V Switching regulated output.
- Each port output current 2 Amp (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
-
Out of stock
Features:
- Sixteen port power supply, AC120V/230V to DC12V(Regulated) /8A (Max) output.
- Each port output current 1.1A (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
-
Out of stock
Features:
- Special design to extend HD DVR/NVR HDMI signal only.
- Include HE01SET transmitter, HE01SER receiver, used in pairs via one CAT5e/6 cable to send HDMI signal.
- HE01SER as active receiver for high performance.
- No external power required.
- Built in micro USB for external power when your HDMI source not able to provide enough power to the receiver.
- Support high resolution 1080p at 40M.
- Support long distance up to 70 meters at 1280x720.
-
Out of stock
Features:
- Extends HDMI signal over one CAT5/5e/6 cable.
- HDMI 1.3 compliant.
- Transmission range up to 50M at 1080i, 30M at 1080p resolution.
- Work with passive receiver as economic type.
- No external power requested at HE01SER receiver unit.
- Extend the transmission distance up to 50M at 1080i / 720p.
- Extend the transmission distance up to 30M at 1080p.
- Package include one HE01ST transmitter, HE01SER receiver, one power adapter.
-
Out of stock
Features:
- Extends HDMI signal over one CAT5/5e/6 cable.
- HDMI 1.3 compliant.
- Built in auto equalization for easy plug and play.
- Transmission range up to 50 meters at 1080p resolution.
- No external power requested at receiver unit under distance 30 meters.
- HDCP compliant.
-
Out of stock
Features:
- Extends HDMI and IR signal over one CAT5/5e/6 cable.
- HDMI 1.3 compliant, 3D capable.
- Built in IR control, IR signal could be selectable at either TX/RX side.
- Transmission range up to 70 meters by 1080i/720p.
- Transmission range up to 40 meters by 1080p@60Hz@24bit.
- Built in auto equalization for easy plug and play.
- Transmitter unit built in EDID auto backup function.
- HDCP compatible.
-
Out of stock
Features:
- Built in Loop out, could be daisy chained for another HE01SLR to extended working range and multiple displays.
- Built in auto equalization, retiming, pre-emphasized for optimum performance.
- Transmission range up to 70M at 1080i, 30M at 1080p resolution.
-
Out of stock
Features:
- Work with HE01ST as receiver for extra remote HDMI display
- Built in loop out port, can daisy chain another HE01SLR to extend working range and multiple displays.
- Built in auto equalization, retiming, pre-emphasized for optimum performance
- Transmission range up to 70M at 1080i, 30M at 1080p resolution.
-
Out of stock
Features:
- Work with HE01ST as economic type receiver.
- No external power requested at HE01SER receiver unit.
- HDMI 1.3 compliant.
- Transmission range up to 60M at 1080i/720p,40M at 1080p resolution
-
Out of stock
Features:
- Extends HDMI and IR signal over one CAT5e/5e/6 cable.
- Uncompressed high definition video up to 1080p@60Hz@48bits and 3D and 4K 60Hz 4:2:0 capable.
- Built in IR control, IR signal could be selectable at either TX/RX side.
- Max. Data Rate- 10.2Gbps.
- HDMI 1.4 and HDCP 2.2 compliance.
- Transmission range up to 60M by CAT5e/6, 70M by CAT6a cable at 1080p@60Hz@24bit.
- Audio support up to LPCM7.1, Dolby TrueHD, DTS-HD MA.
-
Out of stock
Features:
- Extends HDMI and IR signal over one CAT5e/5e/6 cable.
- Uncompressed high definition video up to 1080p@60Hz@48bits and 3D and 4K 60Hz 4:2:0 capable.
- Bi-directional IR, support 30-60kHz.
- Max. Data Rate- 10.2Gbps.
- HDMI 1.4 and HDCP 2.2 compliance.
- Transmission range up to 70M by CAT5e/6 at 1080p@60Hz@24bit.
- Audio support up to LPCM7.1, Dolby TrueHD, DTS-HD MA.
- Support PoH (Power over HDBaseT), no external power required at receiver.
- External power supply included for the Transmitter.
-
Out of stock
Features:
- Extends HDMI Signal over one CAT5e/6 cable.
- Uncompressed high definition video up to 1080p@60Hz@48bits and 3D and 4K 60Hz 4:2:0, 4K 30Hz 4:4:4.
- Max. Data Rate- 10.2Gbps.
- HDMI 1.4 and HDCP 2.2 compliance.
- Transmission range up to 100 meters at 1080p resolution.
-
Out of stock
-
Out of stock
Features:
- Extends HDMI, RS232 and IR signal over one CAT5e/6 cable.
- HDBaseT 2.0, HDCP 2.2 & DVI Compliant.
- Uncompressed high definition video up to 4K 60Hz 4:2:0.
- Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA
- Transmission range up to 100 meters at 4K2K resolution.
- Support long reach mode distance up to 150M at 1080p@60Hz@8bits.
- Bi-directional IR, support 30-60khz.
- Bi-Directional RS232.
-
Out of stock
Features:
- Extends HDMI, USB,RS232 and IR signal over one CAT5e/6 cable.
- HDBaseT 2.0, HDCP 2.2 & DVI Compliant.
- Uncompressed high definition video up to 4K 60Hz 4:2:0.
- Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA.
- Transmission range up to 100 meters at 4K2K resolution.
- Support long reach mode distance up to 150M at 1080p@60Hz@8bits.
- Bi-directional IR, support 30-60khz.
- Bi-Directional RS232.
- USB support USB 2.0 and USB 1.0 and 1.1.
- Perfect for 4K2K touch panel and USB camera application.
-
Out of stock
Features:
- EP01H and EP01HI design as easy PoE transmission kit.
- Perfect solution to send power for non-POE HDBaseT or Ethernet devices.
- To provide HDBaseT or Ethernet devices to send power over existing CAT5e/6 cable.
- Power source could be send either from EP01HI or EP01H (TX or RX) side.
- EP01HI built in isolation power to enhance power transmission reliability and safety.
- Kit package include: EP01H, EP01HI, one DC24V power adapter.
-
Out of stock
Features:
- The transmitter unit of HE03
- Extend HDMI signals over one Cat5e/CAT6 cable.
- Economic HDMI over IP Extender.
- Support point to point connection, allow point to many connections via network switch.
- Dual output: 1 x HDMI loop output for local monitor, plus 1 CAT5e RJ45 output for remote unit.
- Supports resolutions up to 1080p Full HD.
- Transmission range up to 150M over CAT5e, 160M over CAT6.
- HDMI 1.3b and HDCP compliant.
- Perfect for remote machines and security monitoring systems, digital signage application.
- Optional model: SR01 signal repeater for longer distance application
-
Out of stock
Features:
- The receiver unit of HE03
- Extend HDMI signals over one Cat5e/CAT6 cable.
- Economic HDMI over IP Extender.
- Support point to point connection, allow point to many connections via network switch.
- Dual output: 1 x HDMI loop output for local monitor, plus 1 CAT5e RJ45 output for remote unit.
- Supports resolutions up to 1080p Full HD.
- Transmission range up to 150M over CAT5e, 160M over CAT6.
- HDMI 1.3b and HDCP compliant.
- Perfect for remote machines and security monitoring systems, digital signage application.
- Optional model: SR01 signal repeater for longer distance application.
-
Out of stock
Features:
- The transmitter unit of HE03-4K
- Extends 4K UHD HDMI signal over one CAT5e/6 cable.
- Support resolution up to 4K@30hz 4:4:4.
- HDCP 1.4 compliant.
- Audio support up to LPCM1@192KHz.
- Transmission range up to 120M over CAT5e, 140M over CAT6.
- Plug and play for easy operation.
- Optional model: SR01 signal repeater for longer distance application.
-
Out of stock
Features:
- The transmitter unit of HE03-4K
- Extends 4K UHD HDMI signal over one CAT5e/6 cable.
- Support resolution up to 4K@30hz 4:4:4.
- HDCP 1.4 compliant.
- Audio support up to LPCM1@192KHz.
- Transmission range up to 120M over CAT5e, 140M over CAT6.
- Plug and play for easy operation.
- Optional model: SR01 signal repeater for longer distance application.
-
Out of stock
Features:
- Extend HDMI and USB keyboard mouse signals over one CAT5e/CAT6 cable.
- Supports resolutions full HD up to 1920x1080p@60hz.
- Transmission range up to 150M over CAT5e, 160M over CAT6.
- HKM01ET transmitter built in HDMI loop output.
- HKM01ER receiver unit with 2 ports USB devices to extend USB keyboard and mouse.
- Perfect for control remote machines and security monitoring systems, digital signage application.
- Option model: SR01 signal repeater for longer distance application.
-
Features:
- Extend 4K UHD HDMI, USB, RS232, IR and Audio signals over one CAT5e/CAT6 cable.
- Transmission range up to 140M over CAT6, 120M over CAT5e.
- HDMI video resolutions up to 4K 30Hz 4:4:4, 1080p Full HD and 1920 x 1200@ 60Hz.
- HKM01T-4K transmitter unit with HDMI local loop output.
- HDMI audio support up to LPCM 7.1@192Khz.
- HDMI 1.4 and HDCP 1.4 compliant.
- Built in Bi-directional analog audio extender function.
- Support USB 2.0 and compatible with 1.0, 1.1.
- Support Bi-directional RS232.
- Support one way IR extention, IR carrier 20-60 KHz.
- Built in EDID copy.
- Support external SFP optical transceiver, over Fiber extender.
- Receiver unit with 4 ports USB 2.0 devices, to extend USB 2.0 peripheral devices, such as flash drive, hard drive, mass storage device, keyboard, mouse, etc.
- Optional model: SR01 signal repeater for longer distance application. IR-CR01: IR receiver cable.
- Perfect for control remote machines and security monitoring systems, digital signage application.
-
Out of stock
Features:
- Extend IP signal and data signal over CAT5e/CAT6 cable.
- Application as a LAN repeater, to extender IP signal over 100 meters.
- Application as a signal repeater, to work with UE02, VKM03, HE03, HKM01, HKM01E, model to extend signal over 120 meters.
- A long range extension could be done by using multiple repeaters.
- Support 10/100/1000 BASE-T transmission rate.
- Built in LED status indication.
- External power required.
- Plug and play for easy installation.
-
Out of stock
Features:
- Support 4K@60hz (18Gbps) 4:4:4 8bits, HDR.
- Support HDMI 2.0/HDCP 2.2.
- Use external SFP+ 10 Giga module for different distance (Order optional)
- IR/RS232/USB function selection.
- Support USB keyboard mouse.
- Support Bi-directional IR pass through from 20Khz to 60Khz.
- Support Bi-directional RS232.
-
Out of stock
4K 60Hz HDMI & IR/ RS232
Features:- Support 4K@60hz (18Gbps) 4:4:4 8bits, HDR.
- Support HDMI 2.0/HDCP 2.2.
- Use external SFP+ 10 Giga module
- Package includes 10G SFP+ 2KM single mode optical transceiver x 2 units.
- IR/RS232/USB function selection.
- Support USB keyboard mouse.
- Support Bi-directional IR pass through from 20Khz to 60Khz.
- Support Bi-directional RS232.
-
Features:
- Send HDMI signal over single coaxial cable up to 100 Meters at 1080p solution.
- Support video signal NTSC, PAL, 720p, 1080i, 1080p.
- Support daisy chain multiple remote displays. ( Model no: HE01CR Receiver)
- Support HDMI 7.1 Channel audio.
- Option model: HE01CR Receiver.
-
Out of stock
Features:
- Extend HDMI signal over coax up to 500M.
- Send HDMI signal over DVB-T RF Modulator technology
- Support point to point and multiple source devices to multi-display connections via CATV RF splitter/DTV Mixer.
- Support HDMI matrix solution over existing coax cable.
- Video encoding: H.264, support up to 1080P@30fps. Audio encoding: MPEG2
- Transmission distance up to 500m over coax cable.
- Support resolution up to 1080p@60Hz.
- Support up to 99 channel for both of TX/RX with frequency range 142-950MHz
- TX/RX built in LCD display with edit channel setting.
- HE05CT transmitter built in HDMI loop out, channel ID setting by front panel button.
- HE05CR receiver input source selection could be from front panel button or optional IR(Infrared) remote controller.
- HDMI 1.3, HDCP 1.4, DVI 1.0 compliant.
- Applications for family cable TV transmission, hotels, hospitals, schools, video conference room, supermarket, malls, shops where need meeting video distribution, digital signage, student training broadcasting, DVD Blue Ray players video distribution, security monitoring system..etc.
-
Out of stock
Features:
- The transmitter unit of HE05C
- Extend HDMI signal over coax up to 500M.
- Send HDMI signal over DVB-T RF Modulator technology
- Support point to point and multiple source devices to multi-display connections via CATV RF splitter/DTV Mixer.
- Support HDMI matrix solution over existing coax cable.
- Video encoding: H.264, support up to 1080P@30fps. Audio encoding: MPEG2
- Transmission distance up to 500m over coax cable.
- Support resolution up to 1080p@60Hz.
- Support up to 99 channel for both of TX/RX with frequency range 142-950MHz
- TX/RX built in LCD display with edit channel setting.
- HE05CT transmitter built in HDMI loop out, channel ID setting by front panel button.
- HE05CR receiver input source selection could be from front panel button or optional IR(Infrared) remote controller.
- HDMI 1.3, HDCP 1.4, DVI 1.0 compliant.
- Applications for family cable TV transmission, hotels, hospitals, schools, video conference room, supermarket, malls, shops where need meeting video distribution, digital signage, student training broadcasting, DVD Blue Ray players video distribution, security monitoring system..etc.
-
Out of stock
Features:
- The receiver unit of HE05C
- Extend HDMI signal over coax up to 500M.
- Send HDMI signal over DVB-T RF Modulator technology
- Support point to point and multiple source devices to multi-display connections via CATV RF splitter/DTV Mixer.
- Support HDMI matrix solution over existing coax cable.
- Video encoding: H.264, support up to 1080P@30fps. Audio encoding: MPEG2
- Transmission distance up to 500m over coax cable.
- Support resolution up to 1080p@60Hz.
- Support up to 99 channel for both of TX/RX with frequency range 142-950MHz
- TX/RX built in LCD display with edit channel setting.
- HE05CT transmitter built in HDMI loop out, channel ID setting by front panel button.
- HE05CR receiver input source selection could be from front panel button or optional IR(Infrared) remote controller.
- HDMI 1.3, HDCP 1.4, DVI 1.0 compliant.
- Applications for family cable TV transmission, hotels, hospitals, schools, video conference room, supermarket, malls, shops where need meeting video distribution, digital signage, student training broadcasting, DVD Blue Ray players video distribution, security monitoring system..etc.
-
Out of stock
-
Out of stock
Features:
- Extends HDMI and IR signal over two CAT5e/6 cables.
- Transmission range up to 60 meters.
- Support high resolution up to 1080p.
- Built in auto EQ function, no need to do any adjustment for different range.
- Fully HDCP compliant.
- HDMI 1.3a compatible, HDCP 1.1, support DDC, EDID, CEC, Hot Plug Detect
- Built in IR repeater function, could be control the source devices from remote side.
- Receiver unit power could be sending from PCB inside 5V terminal or external 5V DC Jack.
- Package includes: transmitter and receiver unit, one external power adapter, IR emitter cable and IR receiver cable. ( 1.8 meters（6 ft）)
-
Out of stock
Features:
- Extends HDMI and IR signal over two CAT5e/6 cables.
- Transmission range up to 60 meters.
- Support high resolution up to 1080p.
- Built in auto EQ function, no need to do any adjustment for different range.
- Fully HDCP compliant.
- HDMI 1.3a compatible, HDCP 1.1, support DDC, EDID, CEC, Hot Plug Detect
- Built in IR repeater function, could be control the source devices from remote side.
- Receiver unit power could be sending from PCB inside 5V terminal or external 5V DC Jack.
- Package includes: transmitter and receiver unit, one external power adapter, IR emitter cable and IR receiver cable. ( 1.8 meters（6 ft）)
-
Out of stock
Features:
- Connects up to 2 HDMI displays at the same time from a digital video source.
- Support up to 3D, 4K 30Hz 4:4:4, 12-Bit deep color.
- Built in EDID learning/integration function.
- Support LPCM 7.1、Dolby TrueHD、DTS-HD Master Audio.
- Bandwidth: 25~340 Mhz.
- HDMI 1.4a compliance, HDCP 1.4 complaint.
- DVI 1.0 compliance.