-
Out of stock
-
Out of stock
Features:
- Built in 16 port passive HD video transceiver in 1U 19” rack mounting panel.
- Choice of 4 x RJ45 or 4 sets x 8 pin removable screw terminal for 16 channel inputs / outputs.
- To send HD-TVI, AHD, HDCVI camera 720p/1080p up to 300 meters, 4MP/5MP up to 200 meters over UTP cable.
- Passive, No power required.
- Eliminate Coaxial Cable.
- To work with Active Transmitter TTA111HDT, TTA111TVIT for extra long distance transmission.
- Built in ESD, EFT (impulse noise) and transient protection.
-
Out of stock
Features:
- Wide bandwidth, video gain compensation amplification.
- HF compensation.
- 10dB adjustable image gain.
- Sharpness and Brightness adjustment.
- Transmission range: 1000 meters (RG59 coaxial cable).
- Red LED: power on/off.
- It can be connected video camera, multiplexer, VCR, DVR…etc.
- Power supply included.
-
Out of stock
Features:
- 16 AMP Sixteen port power supply, AC120V/230V to DC12V Switching regulated output.
- Each port output current 1.1Amp (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
- Built in fan at front and back panel each for low operating temperature.
-
Out of stock
Features:
-
- 16 x RJ45 connector for video input + power output + data output.
- 4 x RJ45 connector for video output, 4 x 8 pin terminal for power input, 1 x 2 pin terminal for data input.
- Built in Surge Protection on Data.
- 16 cameras cable termination panel, use for integrating power, video and data signals onto 4 x RJ45 4 pairs UTP cable.
- Individual power input, could send different power voltage based on camera power consumption and transmission range.
- Use with TTP111VPD-RJ45 video,power, data transceiver at the camera side.
- Use any third-party power supply to power cameras via UTP over (See below “power distance chart”).
- Use with TTP016-RJ45 as video transceiver receiver at control room.
- Perfect cable management solution from the camera to the wiring station, control room.
-
-
Out of stock
Product Features
- Amazing Phase Shifter/Delay/LFO module from the '80s
- Authentic reproduction of original "System 100M*" circuitry
- 6-step phase shifter with mod intensity, shift frequency and resonance controls
- Analog BBD delay with mod intensity, delay time and resonance controls
- Gate delay with threshold, delay time and gate time controls for creative pulse shaping
- LFO with frequency control plus normal and inverted output for ensemble and stereo effects
- 12 controls and switches give you real-time access to all important parameters
- Eurorack specs: 16 HP, 50 mA +12 V, 50 mA -12 V
-
Out of stock
Product Features
- Amazing quad Signal Gate/Multiple module from the '80s
- Authentic reproduction of original "System 100M*" circuitry
- 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching
- Gates feature control inputs for positive and negative triggers plus LED indicators
- 6-channel multiples, each with 4 floating parallel connectors for optimal signal integrity
- Eurorack specs: 16 HP, 40 mA +12 V, 40 mA -12 V
-
Product Features
- Amazing 2-channel 8-step analog sequencer module from the '80s
- Authentic reproduction of original "System 100M*" circuitry
- Control voltages can be manually set for each step
- Tempo, delay and gate time controls for great flexibility
- Step number selector and series switch allows sequence length between 1 and 16 steps
- Step switch allows for single play or repeating sequences
- Sequencer can be clocked externally via CV and triggered via start/stop button
- 23 controls and switches give you real-time access to all important parameters
- Eurorack specs: 16 HP, 35 mA +12 V, 35 mA -12 V
-
Out of stock
Features:
- 2U Rack Mounting Rack Panel to fit 8pcs TTA111HDT/TTA111HDR/CD102HD/CA101HD
-
Out of stock
Features:
- Ideal for security monitoring stations or video distribution hubs.
- Standard 19-inch (482mm) wide, 3.5-inch (88mm) 2U high.
- Supports up to 9 pieces of TTA111VR or CD102.
- This heavy-gauge panel is designed to withstand the mechanical load of multiple cables.
-
Out of stock
Features:
- Supports up to 1920x1200 @60Hz.
- Long range transmission up to 300 meters (Max.)
- Support analog stereo audio.
- support LPCM 44.1K、48K、96K / 16bit stereo decode function, digital and analog could simultaneously output. Dolby Digital (AC3) and DTS digital output supported.
- Digital transmission on analog stereo audio for sound undistorted.
- Built in equalization, gain adjustment.
- Extends VGA and stereo audio over one CAT5e cable.
- Each set including one piece VE02ALT transmitter and one piece VE02DALS receiver.
- VE02DALS receiver built in RGB skew adjustment for the optimum video performance under long cable run.
- It could be daisy chained for another VE02DALS to extended working range over 300 meters and multiple displays.
- Application for airports, train & bus stations, window display, trades shows, exhibitions.
- Optional model: VE02DALS VGA & Stereo CAT5e Receiver– Built in Skew Corrector
-
Product Features
- Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
- High power handling capability produces full-range output with extremely low distortion
- Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
- Ultra-linear frequency range from 60 Hz to 23 kHz
- Phase-optimized and high-precision crossover for absolute phase linearity
- Auto-overload protection prevents tweeter damage and resets automatically
- Bracket for wall/ceiling mounting included
-
Out of stock
Features:
- 1U Rack Panel Option for insert 2 x TTA414VPDR
-
Out of stock
Features:
- Switch easily between any two DVI sources.
- Extends the range of DVI compliant device by equalizing and reclocking the DVI signal
- Pre-emphasized outputs.
- Built in stereo audio.
- Supports high resolution input: PC: VGA, SVGA, XGA, SXGA, UXGA, WUXGA (1920 x 1200) HDTV: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p @60Hz.
- Supports 250 Mbps to 1.65 Gbps data rates.
- Supports 25 MHz to 165 MHz pixel clocks.
- HDMI pass-through.
- HDCP pass-through.
- IR remote control included.
-
Out of stock
Features:
- Autoformer impedance compatible design as high quality sound effect.
- Low electric power consumption, not easy generating heat.
- High electric power uses 50W/channel (RMS) and 150W/channel (Music Power).
- 4Ω and 8Ω can be used for speaker systems.
- Push-type connector can load 16-22 AWG capacity of speaker cable.
-
Out of stock
High Power Four Channel Powered Loudspeaker Management System, 4500 Watts into 4 Ohms @ 1 kHz Per Channel
10-Year Warranty Program* Designed and engineered in the U.K.
