Features:
- DC5V 2A Switching Power Adapater
-
Out of stock
-
Out of stock
Features:
- DC5V 1A Switching Power Adapater
-
Out of stock
Features:
- Red LED on: Mains power supply is normal.
- Red LED off: Mains power supply abnormal, check incoming supply and cable connections.
- Individual protected PTC type fused outputs.
- Outputs PTC fused rated 1.1Amps at 2.5A/4sec.
- A single channel “short” may cause a temporary disconnection (1 sec.) of other channels.
- At least one second to auto rework, after removing an overload condition.
- This product does not contain a built in main power switch, take additional care when connecting or isolating incoming mains supply. Heed all warning labels.
- Overall Dimension: 224 x 200 x 60 mm
-
Out of stock
Features:
- Red LED on: Mains power supply is normal.
- Red LED off: Mains power supply abnormal, check incoming supply and cable connections.
- Individual protected PTC type fused outputs.
- Outputs PTC fused rated 1.1Amps at 2.5A/4sec.
- A single channel “short” may cause a temporary disconnection (1 sec.) of other channels.
- At least one second to auto rework, after removing an overload condition.
- This product does not contain a built in main power switch, take additional care when connecting or isolating incoming mains supply. Note all warning labels.
- Overall Dimension: 224 x 200 x 60 mm
-
Out of stock
Features:
- Red LED on: Mains power supply is normal.
- Red LED off: Mains power supply abnormal, check incoming supply and cable connections.
- AC24V：Non-load output: AC27V, DC12V：Non-load output: DC17V
- Individual protected PTC type fused outputs.
- Outputs PTC fused rated 1.1Amps at 2.5A/4sec.
- A single channel “short” may cause a temporary disconnection (1 sec.) of other channels.
- At least one second to auto rework, after removing an overload condition.
- This product does not contain a built in main power switch, take additional care when connecting or isolating incoming mains supply. Nlote all warning labels.
- Overall Dimension: 224 x 200 x 60 mm
-
Out of stock
Features:
- 16 AMP Sixteen port power supply, AC120V/230V to DC12V Switching regulated output.
- Each port output current 1.1Amp (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
- Built in fan at front and back panel each for low operating temperature.
-
Out of stock
Features:- 10 AMP Eight port power supply, AC120V/230V to DC5V Switching regulated output.
- Each port output current 2 Amp (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
-
Out of stock
Features:
- Sixteen port power supply, AC120V/230V to DC12V(Regulated) /8A (Max) output.
- Each port output current 1.1A (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
-
Out of stock
Features:
- Sixteen port power supply, AC120V/230V to DC12V (NON-Regulated) output.
- Each port output current 1.1A (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
- NON-LOAD output 17V.
-
Out of stock
Features:
- Sixteen port power supply, AC120V/230V to AC24V /0.5A (Max) output.
- Each port output current 1.1A (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
-
Out of stock
Features:
- One port power supply. AC120/230V to DC12V (Regulated) / 8A (Max) output.
- Built in “no fuse breaker” to avoid current overload.
-
Out of stock
Features:
- One port power supply. AC120/230V to AC24V / 8A (Max) output.
- Built in “no fuse breaker” to avoid current overload.
-
Out of stock
Features:
- Individually protected PTC*-type output fuse rated 1.1Amps@250VAC.
- Individual status LED indicators.
- Surge protected outputs.
- Supports up to 1-30VAC/VDC
- Dimension: 138x84x28mm
-
Out of stock
Features:
- AC/DC to DC12V power converter.
- Allows DC powered camera to be powered by AC.
- Input power: AC18– AC28V; DC18-40V.
- Output Power: DC12V regulated.
- Output Current: 2000mA ( 2Amp)
- Built in green LED indication.
-
Out of stock
Features:
- AC to DC12V Power Converter with DC plug cable 500mA Max.
- Input power: AC15~26V; DC15~28V.
- Output Power: DC12V regulated.
- For DC type camera or video power sources convert using AC24V for professional CCTV Industry Installation.
-
Out of stock
Features:
- Input option: 1 x RS232, 2 x RS485 (3 input can be “stand by” status at the same time, but only one controller will be activated at once)
- Output: 16xRS485, each channel connection range up to 1200 meters by twisted pair cable.
- Built in surge protection at each channel.
- Ability to cascade connection to other units RS004/RS008/RS016.
- The application gives serial data back on 4 outputs at the same time, to provide perfect configurations.
- Power supply included
-
Out of stock
Features:
- Input option: 1 x RS232, 2 x RS485 (3 input can be “stand by” status at the same time, but only one controller will be activated at once)
- Output: 16xRS485, each channel connection range up to 1200 meters by twisted pair cable.
- Built in surge protection at each channel.
- Ability to cascade connection to other units RS004/RS008/RS016.
- The application gives serial data back on 4 outputs at the same time, to provide perfect configurations.
- Power supply included.
-
Out of stock
Features:
- Input option: 1 x RS232, 2 x RS485 (3 input can be “stand by” status at the same time, but only one controller will be activated at once)
- Output: 4xRS485, each channel connection range up to 1200 meters by twisted pair cable.
- Built in surge protection at each channel.
- Ability to cascade connection to other units RS004/RS008/RS016.
- The application gives serial data back on 4 outputs at the same time, to provide perfect configurations.
- Power supply included.
-
Out of stock
Features:
-
- Extends any RS232 compliant devices up to 2000 meters at 115200bps.
- One CAT5e/5E cable
- Easy plug and play installation.
- Full-duplex data communication
- Speed up to 115,200 bps.
- Complete transmission of all pin RS-232C signals.
-
-
Out of stock
Features:
- Repeater from RS485 data signal to RS485 up to 1200 meters.
- Plug in screw terminal block for easy wiring.
- Power input from DC jack.
- Auto detected Baud rate maximum up to 115.2 Kbps.
- Red Led: Power/RX
- Built in 2.5KV isolation protection.
- Surge protection.
-
Out of stock
Features:
- USB to RS485 interface converter.
- Two wire, differential signals, half duplex.
- Non power operation.
- Auto switching baud rate, speed up to 115,200 baud over a distance 1200 meters.
- 32 units connected together in RS-485 multi drop installations.
- USB 2.0 Compliant
- Powered by PC
- Connect/Disconnect Without Reboot
- Windows 98, ME, XP & 2000 Compatible
- MAC OS 8.6 to 9.2 Compatible
- Software Drivers Included
-
Out of stock
Features:
- DB9 female connector for RS232 to 2 wires Terminal Block for RS485.
- Two wire, differential signals, half duplex.
- Non power operation.
- Auto switching baud rate, speed up to 115,200 baud over a distance 1200 meters.
- 32 units connected together in RS-485 multi drop operation.
-
Out of stock
Features:
- Extend four USB devices up to 60 meters over CAT5e cable.
- Supports USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices.
- Remote unit built in 4 port hub to connect 4 USB devices.
- Including local and remote unit, 1 x 5V external power supply.
- Plug and play for easy operation.
- Application for extending all USB 2.0 peripheral devices, such as USB camera, printer, scanner, USB Ethernet/VGA/HDMI adapter, mass storage device, keyboard, mouse, etc.
-
Out of stock USB CAT5 EXTENDERFeatures:
- Extend one USB device with full-speed 70 meters (Max), low-speed 300 meters (Max) over CAT5e cable.
- USB 1.1 compliant.
- Distance less 50 meters, no external power required.
- Distance over 50 meters, external power adapter requested at UE01T remote unit.
- Low speed keyboard mouse equipments up to 300 meters, external power adapter requested for UE01T remote unit.
- Application for extend USB peripheral devices, such as keyboard, mouse, IP camera, printer, etc.
- Package including remote unit and local unit without power adapter.
-
Out of stock
Features:
- Extend USB Keyboard and mouse via one CAT5e UTP cable.
- Transmission range up to 600 meters.
- External power required at remote side.
- Built in LED indication.
- No external power adapter required under 30 meters.
-
Out of stock
Features:
- Four emitter output connections
- Power receptacle with LED indicator
- Two IR(Infrared) receiver inputs available via 3-p screw connector or 3.5mm jack
- For mounting/adhesive near audio equipment
-
Out of stock
Features:
- Four emitter output connections
- Status power receptacle with LED indicator
- Power receptacle with LED indicator
- Removable connector for system connection
- For mounting/adhesive near audio equipment
-
Out of stock
Features:
- Dual IR(Infrared) Emitter with Bare ends tinned E
-
Out of stock
-
Out of stock
Features:
- IR(Infrared) Emitter with Bare ends tinned E
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- Status Indicator
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- IR(Infrared) transmitting range: 2 feet for the distance of between LED’s facing to the sensors in a line of sight and IR(Infrared) transmitting angle: up to 1 feet for +/– 45 degrees off axis, depending on remote strength and ambient interference.