Products

/Shop
  • Out of stock

    CMS 1201SW

    25,000.00

    12" Ceiling Subwoofer for Installation Applications

    • High power ceiling subwoofer for installation applications
    • 400 Watts continuous, 1,600 Watts peak power
    • 12? driver with long throw copper voice coil for low power compression
    • Provides low frequency reinforcement for class-leading Tannoy CMS 3.0 range
    • For use with CMS 1201SW back can and CMS 1201 grille assembly (available separately)
    • Back can fixings allow multiple installation options
    • Time-saving design enables one person speaker installation
    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    CMS 1201DCT

    40,000.00

    Product Features

    • Full range ceiling loudspeaker for installation applications
    • 200 Watts continuous, 800 Watts peak power
    • 12" Dual Concentric full range driver for point source phase coherence
    • 90° constant directivity dispersion for optimum coverage
    • Multiple transformer taps for 70 V and 100 V line systems or 8 Ohm direct input
    • Low insertion loss 60 W line transformer
    • For use with CMS 1201 back can and grille assembly (available separately)
    • Back can fixings allow multiple installation options
    • Time-saving design enables one person speaker installation
  • Out of stock

    CMS 1201DC

    35,000.00

    12" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications

    • Full range ceiling loudspeaker for installation applications
    • 200 Watts continuous, 800 Watts peak power
    • 12? Dual Concentric full range driver for point source phase coherence
    • 90? constant directivity dispersion for optimum coverage
    • For use with CMS 1201 back can and grille assembly (available separately)
    • Back can fixings allow multiple installation options
    • Time-saving design enables one person speaker installation
    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    Grille Assembly for CMS 1201 Ceiling Loudspeakers and CMS 1201SW Ceiling Subwoofers

    • Grille assembly for use with CMS 1201 ceiling loudspeakers and CMS 1201SW ceiling subwoofers
    • Powder coated perforated steel mesh grille with dust protection
    • UV resistant ABS moulded surround for a flush finish
    • Snap-fit grille easily removed from surround for custom painting on site
    • Surround secured in position with 4 fixing screws
    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    CMS 1201 BACKCAN

    34,000.00

    Back Can for CMS 1201 Series Ceiling Loudspeakers

    • Acoustically enhanced powder coated zinc plated steel back can for CMS 1201 ceiling loudspeakers
    • Designed for pre-installation in newly constructed suspended and non-suspended ceilings
    • Back can and containment can be installed prior to completion of ceiling
    • Internally damped 79 litre (2.8 cubic feet) capacity provides exceptional low frequency performance
    • Back can fixings allow multiple installation options
    • Steel mounting lugs for fitting to a Unistrut* roof rail system or hanging via 4 top-mounted eye bolts
    • Single point hang via M10 or 3/8" UNC threaded rod
    • Time-saving design enables one person speaker installation
    • Phoenix* connectors for input and link output
    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    CM1A

    12,000.00

    Product Features

    • Converts MIDI signals to analog control voltages for modular synthesizers
    • High-resolution 16-Bit Texas Instruments DAC for high resolution and pitch accuracy
    • Enables modular synthesizers to be controlled by a MIDI keyboard, sequencer or DAW
    • Dual trigger outputs can be used to control envelope generators
    • Select between V-trigger, S-trigger or both for maximum flexibility
    • Eurorack specs: 6 HP, 70 mA +12 V, 10 mA -12 V
  • CM-2 MIC BOOSTER

    8,000.00
    2-Channel Dynamic Microphone Booster with High-Quality Preamps
  • CM-1 MIC BOOSTER

    5,000.00

    Dynamic Microphone Booster with High-Quality Preamp

  • Out of stock

    Product Features

    • Classic 1027 clocked sequential controller module from the '70s
    • Authentic reproduction of the circuitry from the "2500" Series
    • Contains an integrated circuit 8-step counter and 3 channels (A, B and C) of control voltages
    • 8 rows of 3 controls provide 3 independently adjustable voltage outputs for each step of the counter
    • Built-in time base generator allows the sequencer to step automatically
    • Each row has an adjacent LED indicator to display the sequencer count
    • Illuminated push button is used to start and stop the internal clock
    • Rate of the internal clock can be adjusted from a stepping rate of 20 per minute to 400 per second by adjusting the Pulse Repetition Frequency control and the external rate control signal
    • Internal clock can be turned on and off by applying pulses on the appropriate input connections
    • Clock pulse width and duration of the step voltages is adjusted from 0 to 100% by the Pulse Width control and the external width control signal
    • With the clock turned off the sequencer may be stepped along and reset manually using the front panel push buttons
    • Control voltages on channel A, B and C range between 0 to 10 V
    • The 1027 can be used to control other 2500 Series modules including the 1026 Preset Voltages or 1050 Mix Sequencer modules
    • Cable connections are provided on the rear of the PCB for this purpose (cable included)
    • Eurorack specs: 26 HP, 50 mA +12 V, 30 mA -12 V
  • CLARITY M STEREO

    31,700.00

    Stereo Audio Meter with 7" High Resolution Display and USB Connection for Plug-In Metering

    • Professional stereo audio meter for mixing, mastering and post production
    • 7" high resolution LCD display for precision metering in all studio environments
    • USB connection for hassle-free VST*, Audio Units and AAX* plug-in metering
    • Stereo 96 kHz AES3 digital audio on 75 Ohm BNC connectors for broadcast-grade metering
    • Ultimate metering toolbox to diagnose your mix for phase, balances, frequency distribution, loudness, channel weighting, clipping, mono compatibility
    • Vectorscope for detailed Left-Right analysis
    • High accuracy real time analyzer with 1/3 octave resolution
    • Easy-read Balance-O-Meter to quickly check Left-Right and Mid-Side balances of your mix
    • Precision correlation meter warns you about phase problems
    • State-of-the-art scalable true peak meter identifies clipping in DACs, CODECs and downstream filters
    • Legendary LM6 loudness radar meter provides all essential loudness monitoring information on a single screen
    • Detailed statistics overview for all key loudness measuring parameters
    • Provision for custom logo on LCD display
    • Compliant with all major broadcast standards including ITU BS.1770-4, ATSC A/85, EBU R128, TR-B32 and OP-59
    • RAM-mount compatible for wall or ceiling mounting (not included)
    • Stereo Optical Input for TOSLink* source
    • General purpose input (GPI) for meter reset
    • 1-Year Warranty Program*
    • Designed and engineered in Denmark
  • Out of stock

    CLARITY M

    37,500.00

    Stereo and 5.1 Audio Loudness Meter with 7" High Resolution Display and USB Connection for Plug-In Metering

    • Professional stereo and 5.1 audio meter for mixing, mastering and post production
    • 7" high resolution LCD display for precision metering in all studio environments
    • USB connection for hassle-free VST*, Audio Units and AAX* plug-in metering
    • Compliant with all major broadcast standards including ITU BS.1770-4, ATSC A/85, EBU R128, TR-B32 and OP-59
    • 6 input channels of unbalanced AES3 digital audio on 75 Ohm BNC connectors for broadcast-grade 5.1 metering
    • Legendary LM6 Loudness Radar Meter provides all essential loudness monitoring information on a single screen
    • State-of-the-art true peak meter identifies clipping in DACs, CODECs and downstream filters
    • Downmix compliance meter based on TC Electronic's industry-standard loudness measurement algorithms
    • Precision stereo/surround correlation meters
    • High accuracy real time analyzer with 1/3 octave resolution
    • Detailed statistics overview for all key loudness measuring parameters
    • Provision for custom logo on LCD display
    • RAM-mount compatible for wall or ceiling mounting (not included)
    • Stereo Optical Input for TOSLink* source
    • General purpose input (GPI) for meter reset
    • 1-Year Warranty Program*
    • Designed and engineered in Denmark
  • CL9

    3,400.00
    • Kick ass with a powerful, percussive sound on your clean guitar and melt steel alloy when playing lead with ultimate sustain
    • This Behringer product has been designed to compete head to head with leading products on the market
    • "Smoothes out" volume peaks and provides endless sustain with ultra-stable dynamics
    • Dedicated Sustain, Level and Attack time controls for awesome sound shaping
    • Status LED for effect on/off and battery check
    • First-class electronic On/Off switch for highest signal integrity in bypass mode
    • Runs on 9 V battery or the Behringer PSU-SB DC power supply (not included)
    • 3-Year Warranty Program*
    • Designed and engineered in Germany
  • Out of stock

    Tube-Like Overdrive with Extremely Responsive and Expressive Feel

    • Transparent tube-like overdrive
    • Extremely responsive and expressive feel
    • Super wide gain range
    • True Bypass for ultimate signal integrity
    • "Built-like-a-tank" metal chassis
    • Runs on 9 V battery or the TC Electronic Powerplug 9 (not included)
    • 1-Year Warranty Program*
    • Designed and engineered in Denmark
  • CHOKA TREMOLO

    4,200.00

    Vintage-Flavored All-Analog Tremolo Pedal with 3-Knob Design and Seamless Morphing Between LFO Styles

    • Versatile and authentic all-analog tremolo pedal
    • Classic 3-knob design allows you to control speed and depth
    • Seamlessly morph between soft and hard LFO styles
    • True bypass for ultimate signal integrity
    • "Built-like-a-tank" metal chassis
    • Runs on 9 V battery or the PSU-SB DC power supply (not included)
    • One Year Warranty Program*
    • Designed and engineered in Denmark
  • CHEVIOT

    204,000.00

    Heritage Floor-Standing 12" Dual Concentric HiFi Loudspeaker Based on Famous HPD Design

    • Heritage 2 way floor-standing loudspeaker based on famous HPD design for large sized rooms
    • Cabinet design and components provide authentic reproduction of original HPD loudspeaker system
    • Dual Concentric driver based on famous HPD 1974 pedigree technology provides class-leading coherence and point-source imaging
    • Sophisticated crossover network with 2 separate channels perfectly complements Dual Concentric driver for truly natural sound
    • Front mounted control panel houses 2 band energy control with boost and attenuation compensation for room design and tailoring to personal preference
    • Highly efficient 12" driver with 500-Watt power handling delivers breathtaking dynamics and realism
    • Wide frequency range with fast transient response provides exceptionally natural audio reproduction
    • Heavy duty 24 carat multi-layer gold plated Tannoy customized binding posts for optimum signal transmission and integrity
    • 8 mm floor coupling spikes provide stability and dissipate unwanted energy
    • Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
    • High density cabinet provides extreme rigidity to control low frequency performance
    • Extensive bracing incorporates DMT (Differential Materials Technology) for coupling drivers to cabinets
    • Tannoy - Over 95 years of British sound heritage and innovation
  • 4K HDMI CAT5e Distribution

    FEATURES:

    • The receiver unit of HE03L-4K for long distance
    • Extends 4K UHD HDMI signal over one CAT5e/6 cable.
    • Support resolution up to 1080P@60Hz, 4K@30Hz 4:4:4, 1920x1200@120Hz.
    • HDCP 1.4 compliant.
    • Audio support up to LPCM7.1@192KHz.
    • Built in 1 HDMI output and 2 RJ45 output.
    • Allow to chain to another HE03LR-4K for longer distance and multiple displays.
    • Can chain up to 250 displays, transmission distance with 2.5KM max.
    • Plug and play for easy operation.
    • Optional model: SR01 signal repeater for longer distance application.
  • Out of stock

    Features:

        • Extend IP camera signal with power over existing coaxial cable or any two wire cable.
        • Extend Ethernet or any TCP/IP devices up to 1.5Km.
        • Provide IP camera power up to DC12V 1Amp (12W) ,distance up to 500M.
        • Support chainable/ series/star connection up to 4 IP cameras.
        • Support 10/100BASE-T transmission rate.
        • When doing one camera to IP with Power installation, power source could select either from transmitter or receiver .
        • When doing series or star installation to send IP with power, each IP07M need external power adapter.
        • Perfect to upgrade the analog camera system into IP CCTV application.
        • IP07M Power Source Option Model:
      DC48V 40W power adapter: SWP480830 DC56V 70W power adapter: SWP551260
  • CFM-2

    1,200.00

    Product Features

    • Replacement Crossfader for
    • VMX1000/VMX1000USB/VMX300/VMX300USB/VMX200/VMX200USB/DJX700/DJX750/DJX400/DX626/DX052/NOX101
    • Designed and engineered in Germany
  • CFM-1

    1,200.00

    Product Features

    • Replacement Crossfader for
    • DX500
    • Designed and engineered in Germany
  • Out of stock

    CF-600

    131,300.00

    FLEX ARRAY Conversion Frame

    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.
  • CEILING MICROPHONE - CEILING MICROPHONE WITH SUPERIOR AUDIO PICK UP

    Create a clutter-free environment while experiencing clear, crisp audio conferencing with ceiling microphones. digital microphone array is the only audio pick up device on the market that offers consistent, reliable, 360-degree coverage and  StereoSurround™ audio. When this conference room microphone is paired with video conferencing systems, your team is equipped with the audio solution they need to take collaboration to the next level.
  • CE500D

    19,000.00
    • Multi-purpose, 100-Watt, active speaker for commercial sound applications
    • Perfect for restaurants, shops, exhibitions, multimedia, home recording and A/V production
    • Exceptional sound quality, wide dynamic range and ultra-linear frequency range
    • Revolutionary Class-D amplifier technology: enormous power and incredible sonic performance
    • Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
    • Ultra-low noise mic/line input with volume control and peak LED
    • Additional line output connector allows linking of additional speaker systems
    • Integrated limiter for ultimate system control and speaker protection
    • Ultra-flexible and heavy-duty wall-mount bracket included
    • Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
  • Out of stock

    CB-55-WH

    13,000.00

    Ceiling Bracket 55 kg in White

    • Bracket for Loudspeakers up to 55 kg
    • Mounts 1 Speaker to a ceiling
    • Supports up to 55 kg load
    • Finished in a hard wearing semi matt white powder coat
    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    CB-55

    13,000.00

    Ceiling Bracket 55 kg in Black

    10-Year Warranty Program* Designed and engineered in the U.K.
  • Out of stock

    CB-10

    14,000.00

    Ceiling Bracket in White

    10-Year Warranty Program* Designed and engineered in the U.K.
  • CB 100

    5,300.00

    Product Features

    • Universal condenser microphone for acoustic instruments
    • Frequency response designed for string, brass, percussion and wind instruments
    • Cardioid polar pattern brings clarity and details
    • Flexible gooseneck shaft for effortless "sweet spot" positioning
    • Integrated XLR cable for extreme mobility during performance
    • Extremely high signal output lets the sound cut through
    • XLR phantom power adaptor
    • Effective wind and pop noise filters included
    • Compatible with most instrument clamps (not included)
    • Impact-resistant carrying case included
    • Rugged, reliable die-cast body construction
  • Out of stock

    Features:

    • To send broadband CATV, VHF, VHF and FM signal over CAT5e cable.
    • Shielded RJ45 male with 2M RG6 coax cable.
    • Passive type, no external power required.
    • Support bandwidth 40Mhz to 2.4Ghz.
    • Distance up to 30M at 2.4Ghz frequency.
    • Max. distance up to 100M based on low frequency.
    • Work with CATV, satellite receivers, RF splitter and amplifier.
    • Package include 2 units/a pair.
  • Out of stock

    CAT5E-5M

    6,000.00

    Ruggedised Cat5e UTP Network Cable (5 Metres)

    • Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
    • Length 5 metres
    • Designed and engineered in the U.K.
  • Out of stock

    CAT5E-50M

    28,000.00

    Tour-Grade Ruggedised and Screened Cat5eNetwork Cable (50 Metre Reel)

    • Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
    • Length 50 metres
    • Tested for both AES50 and EtherSound* audio networking
    • Dual shielding for protection against EMI and ESD interference
    • Dual jacket construction with PUR and FRNC layers for enhanced cable resilience
    • Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
    • Robust and lightweight Schill* cable drum, with auxiliary winder and integrated break
    • Extend two 50 m cables to 100 m using optional Neutrik NE8FF connector (not included)
    • Rubber caps on etherCON connectors cover terminals during setup and transport
    • Velcro* straps secure cable ends during transportation
    • 1-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    CAT5E-30M

    16,000.00

    Ruggedised Cat5e UTP Network Cable (30 Metres)

    • Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
    • Length 30 metres
    • Designed and engineered in the U.K.
  • Out of stock

    CAT5E-1M

    4,000.00

    Ruggedised Cat5e UTP Network Cable (1 Metre

    • Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
    • Length 1 metre
    • Designed and engineered in the U.K.
  • Out of stock

    CAT5E-10M

    9,000.00

    Ruggedised Cat5e UTP Network Cable (10 Metres)

    • Ruggedised Cat5e UTP network cable with Neutrik* etherCON connectors
    • Length 10 metres
    • Designed and engineered in the U.K.
  • CAT5E-100M

    88,000.00

    • Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
    • Length 100 metres
    • Supplied on reel with heavy duty steel frame and integral carrying handle
    • Designed and engineered in the U.K.
  • Out of stock

    4K 60Hz 4:4:4 HDMI & IR/RS232/PoH

    Features:
    • Extends HDMI 4K UHD, RS232 and IR signal over one CAT5e/6 cable.
    • HDMI 2.0, HDCP 2.2/1.4 & DVI Compliant.
    • Support 4K 60Hz 4:4:4, HDR. 18Gbps (6Gbps per color)
    • Support 1080p@60Hz@48bits at 70M, 4K@60Hz at 40M.
    • Support PoH (Power over HDBaseT), allow power send either from TX or RX unit.
    • Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA
    • Bi-directional IR, support 30-60khz.
    • Bi-Directional RS232.
    • Support CEC, EDID pass through
  • Out of stock

    4K 60Hz 4:4:4 HDMI & IR/RS232/PoH

    Features:
    • Extends 4K HDMI RS232 and IR(Infrared) signal over one CAT5e/6 cable.
    • HDMI 2.0, HDCP 2.2/1.4 & DVI Compliant.
    • Support 4K 60Hz 4:4:4, HDR(High Dynamic Range Imaging). 18Gbps (6Gbps per color)
    • Support 4K 60Hz /1080p 60Hz@48bits at 100M.
    • Support PoH (Power over HDBaseT), allow power send either from TX or RX unit.
    • Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA
    • Bi-directional IR(Infrared), support 30-60kHz.
    • Bi-Directional RS232.
    • Support CEC, EDID pass through
  • Out of stock

    CAT

    39,400.00

    Product Features

    • Amazing analog synthesizer with dual VCO design allows for insanely fat music creation
    • Authentic reproduction of original "CAT SRM II" circuitry with matched transistors and JFETs
    • Pure analog signal path based on authentic VCO, VCF and VCA designs
    • 4 variable and simultaneous oscillator shapes (Sawtooth, Triangle, modulated Pulse and Sub-Octave Square) for ultimate sounds
    • Duophonic/Paraphonic mode allows both oscillators to be independently controlled
    • Oscillators can be modulated from 6 different sources with 2 modulation depth attenuators
    • Classic filter design (low pass with peak/resonance) with self-resonance capability
    • Filter can be modulated from 6 different sources with 2 modulation depth attenuators
    • Dedicated and fully analog sine/square wave LFO
    • 2 analog Envelope Generators for modulation of VCF and VCA
    • White noise generator dramatically expands waveform generation
    • 16-voice Poly Chain allows combining multiple synthesizers for up to 16 voice polyphony
    • Complete Eurorack solution main module can be transferred to a standard Eurorack case
    • 47 controls give you direct and real-time access to all important parameters
    • Audio input for processing external sound sources for enhanced creativity
    • External control inputs and outputs (High Note CV, Low Note CV, Gate, Filter etc.)
    • Comprehensive USB/MIDI implementation with MIDI channel and Voice Priority selection
  • 2-Way Floorstanding 15" Dual Concentric HiFi Loudspeaker (Oiled Walnut)

    • 2 way floorstanding loudspeaker for large sized rooms
    • Dual Concentric driver technology provides class-leading coherence and point-source imaging
    • 15" highly efficient driver with 96 dB/Watt sensitivity and 600 Watt peak power handling deliver breath-taking dynamics and realism
    • PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances the point source symmetrical dispersion properties
    • Aluminium-magnesium alloy diaphragm and Mylar surround compression driver delivers exceptional clarity and articulation throughout the high frequency range
    • Handcrafted oiled walnut veneered cabinet with hand-selected burr walnut inlays provides a unique and timeless piece of furniture
    • capacitors, low loss laminated core inductors and thick film resistors delivering a more natural and cohesive sound
    • bi-wireable binding posts to improve signal transmission and integrity
    • Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
    • High density birch ply cabinet provides extreme rigidity to control low frequency performance
    • Variable Distributed Port system allows low frequency output to be tuned to suit any room dimensions
    • Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
    • Precision machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet
    • Specially formulated Prestige wood wax provided to keep cabinet in pristine condition
    • Tannoy - Over 95 years of British sound heritage and innovation
    • SOLD BY PAIR
  • CA602

    44,000.00

    2 x 60 Watt Commercial Amplifier with Energy Star Certification

    • 2 x 60 Watt amplifier for commercial and industrial applications
    • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
    • Energy Star* certified design conserves energy and drastically reduces operational cost
    • Direct drive, constant power technology for superior audio performance and reliability
    • GPI remote volume control using standard RJ-45 connector and Ethernet cable
    • Individual front panel master volume and bass/treble controls for each output
    • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
    • Front panel power control button for direct access
    • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
    • Euroblock type amplifier input and output connectors
    • Convection-cooled, fan-less amplifier technology for low noise
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • CA601

    35,000.00

    60 Watt Commercial Amplifier with Energy Star Certification

    • 60 Watt amplifier for commercial and industrial applications
    • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
    • Energy Star* certified design conserves energy and drastically reduces operational cost
    • Direct drive, constant power technology for superior audio performance and reliability
    • GPI remote volume control using standard RJ-45 connector and Ethernet cable
    • Individual front panel master volume and bass/treble controls
    • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
    • Front panel power control button for direct access
    • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
    • Euroblock type amplifier input and output connectors
    • Convection-cooled, fan-less amplifier technology for low noise
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • Out of stock

    CA2402

    52,000.00

    2 x 240 Watt Commercial Amplifier with Energy Star Certification

    • 2 x 240 Watt amplifier for commercial and industrial applications
    • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
    • Energy Star* certified design conserves energy and drastically reduces operational cost
    • Direct drive, constant power technology for superior audio performance and reliability
    • GPI remote volume control using standard RJ-45 connector and Ethernet cable
    • Individual front panel master volume and bass/treble controls for each output
    • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
    • Front panel power control button for direct access
    • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
    • Euroblock type amplifier input and output connectors
    • Convection-cooled, fan-less amplifier technology for low noise
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • Out of stock

    CA2401

    44,000.00

    240 Watt Commercial Amplifier with Energy Star Certification

    • 240 Watt amplifier for commercial and industrial applications
    • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
    • Energy Star* certified design conserves energy and drastically reduces operational cost
    • Direct drive, constant power technology for superior audio performance and reliability
    • GPI remote volume control using standard RJ-45 connector and Ethernet cable
    • Individual front panel master volume and bass/treble controls
    • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
    • Front panel power control button for direct access
    • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
    • Euroblock type amplifier input and output connectors
    • Convection-cooled, fan-less amplifier technology for low noise
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • Out of stock

    CA1202

    40,000.00

    2 x 120 Watt Commercial Amplifier with Energy Star Certification

    • 2 x 120 Watt amplifier for commercial and industrial applications
    • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
    • Energy Star* certified design conserves energy and drastically reduces operational cost
    • Direct drive, constant power technology for superior audio performance and reliability
    • GPI remote volume control using standard RJ-45 connector and Ethernet cable
    • Individual front panel master volume and bass/treble controls for each output
    • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
    • Front panel power control button for direct access
    • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
    • Euroblock type amplifier input and output connectors
    • Convection-cooled, fan-less amplifier technology for low noise
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • CA1201

    40,000.00

    120 Watt Commercial Amplifier with Energy Star Certification

    • 120 Watt amplifier for commercial and industrial applications
    • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
    • Energy Star* certified design conserves energy and drastically reduces operational cost
    • Direct drive, constant power technology for superior audio performance and reliability
    • GPI remote volume control using standard RJ-45 connector and Ethernet cable
    • Individual front panel master volume and bass/treble controls
    • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
    • Front panel power control button for direct access
    • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
    • Euroblock type amplifier input and output connectors
    • Convection-cooled, fan-less amplifier technology for low noise
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • Out of stock

    C5A

    10,300.00
    • Vintage-style studio monitor modeled after a famous model from the 70's
    • High-end 30-Watt Class-D amplifier built-in to perfectly match the speaker's performance
    • Full-range 5 1/4" speaker with special diaphragm and deformation-resistant chassis
    • Homogeneous dispersion pattern due to singular small-diaphragm full-range driver configuration
    • Magnetic shielding allows placement near computer monitors
    • 6 1/2" cube cabinet with detachable acoustic foam and attractive wood laminate
    • Precision-milled, high-rigidity MDF cabinet and baffle for minimal resonance
    • 5/8" microphone stand mount built into the cabinet base
    • 1/4" soft neoprene pad to serve as an acoustic isolator
    • Professional balanced XLR, 1/4" TRS and RCA input connectors plus gain control for precise calibration in stereo setups
    • 3-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    C50A

    17,500.00
    • High-resolution, 30-Watt active nearfield monitor
    • Full-range 5 1/4" speaker with special diaphragm and deformation-resistant chassis
    • Frequency response from 90 Hz to 17 kHz with zero crossover phase distortion
    • Homogeneous dispersion pattern due to singular small-diaphragm full-range driver configuration
    • Magnetic shielding allows placement near computer monitors
    • 6 1/2" cube cabinet with multiple coats of high-gloss piano lacquer finish
    • Precision-milled, high-rigidity MDF cabinet and baffle for minimal resonance
    • 5/8" microphone stand mount built into the cabinet base
    • 1/4" soft neoprene pad to serve as an acoustic isolator
    • Servo-balanced XLR, 1/4" TRS and RCA input connectors plus gain control for precise calibration in stereo setups
    • 3-Year Warranty Program*
    • Designed and engineered in the U.K.
  • Out of stock

    C210B

    38,000.00
    • Battery powered column loudspeaker for portable PA applications and high quality music playback
    • Up to 6 hours of battery life at 100% playback power and 10 hours at 50% playback power with integrated Li-Ion battery
    • Integrated charging time of 7 hours up to 80% and 10 hours up to 100% battery levels
    • 160 Watt power with multi-channel Class-D technology
    • High quality Bluetooth* audio streaming
    • LED lighting creates club-style atmosphere
    • 3 channel mixer with individual gain controls
    • Studio-grade echo adds finishing touch to your sound
    • Intuitive user control interface with LCD display for ease of navigation
    • 8" high excursion low frequency driver for strong sub-bass response
    • 4 x 2.75" drivers with edge wound copper voice coils for extended high frequency reproduction
    • Precision-lock system eliminates speaker cables and stands
    • High impact and lightweight enclosure
    • Integrated protective perforated steel mesh grilles
    • Integral ergonomic carrying handle for ease of portability
    • 3-Year Warranty Program*
    • Designed and engineered in Germany
  • Out of stock

    C210

    28,100.00
    • Modular column loudspeaker for portable PA applications and high quality music playback
    • Extremely wide sound dispersion provides consistent sound to the audience and performers
    • 200 Watt power with multi-channel Class-D technology
    • High quality Bluetooth* audio streaming
    • MP3 player included to play audio files via USB sticks and SD/MMC cards
    • LED lighting creates club-style atmosphere
    • Comprehensive remote control included for ultimate flexibility
    • 3 channel mixer with individual gain controls
    • Studio-grade echo adds finishing touch to your sound
    • Intuitive user control interface with LCD display for ease of navigation
    • 8" high excursion low frequency driver for strong sub-bass response
    • 4 x 2.5" drivers with edge wound copper voice coils for extended high frequency reproduction
    • Precision-lock system eliminates speaker cables and stands
    • High impact and lightweight enclosure
    • Integrated protective perforated steel mesh grilles
    • Integral ergonomic carrying handle for ease of portability
    • 3-Year Warranty Program*
    • Designed and engineered in Germany
  • C112

    7,400.00

    Product Features

    • Professional large-diaphragm dynamic microphone for unsurpassed audio quality
    • Optimized frequency response for bass drums, bass guitar cabinets and brass instruments
    • Ideal as main and support microphone for studio recordings and live performances
    • Super-cardioid polar pattern for outstanding sound source separation
    • Rugged, reliable metal die-cast construction
    • Gold-plated 3-pin XLR output connector for highest signal integrity
    • Integrated microphone mount for precise positioning
    • 5/8" threaded adapter included to match all types of microphone stands
MENU
DEMO