Products

/Shop
  • Out of stock

    Features:

    • Extend and distribute VGA or DVI signal with USB, bi-directional RS232/IR(Infrared), and analog audio signals over LAN.
    • Supports resolutions up to 1920 x 1200 60Hz (Max)
    • HDCP 1.4 compliant.
    • Transmission range up to 150M over CAT5e/CAT6.
    • Support SFP optical transceiver, single mode transmission distance up to 60KM.
    • Support Windows based management software, using PC for easy setting input/output link.
    • Support Android/iOS APP for channel select and management.
    • Support IR(Infrared) remote control or front panel button for channel select and management.
    • Support up to 8x16 video wall.
    • Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
    • Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
    • RS232 port support external Keypad/Console control. (Custom made available)
    • Built in Bi-Directional analog audio transmission (only in unicast mode).
    • Built in Bi-Directional IR(Infrared) extension.
    • VDKM02BT Transmitter unit built in HDMI local loop output.
    • VDKM02BR Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
    • Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
    • Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
    • Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
    • Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
  • Out of stock

    Features:

    • Extend and distribute 4K HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
    • Supports resolutions up to 1080p 60Hz FullHD.
    • HDCP 1.4 compliant.
    • Transmission range up to 150M over CAT5e/CAT6.
    • Support SFP optical transceiver, single mode transmission distance up to 60KM.
    • Support Windows based management software, using PC for easy setting input/output link.
    • Support Android/iOS APP for channel select and management.
    • Support IR remote control or front panel button for channel select and management.
    • Support up to 8x16 video wall.
    • Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
    • Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
    • Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
    • RS232 port support external Keypad/Console control. (Custom made available)
    • Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
    • Built in Bi-Directional analog audio transmission (only in unicast mode).
    • Built in Bi-Directional IR extension.
    • HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
    • HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
    • HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
    • Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
    • Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
    • Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
    • Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
    • Option Model: 1U 19” Rack Mounting Panel TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
  • Out of stock

    Features:

    • Extend and distribute HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
    • Supports resolutions up to 1080p 60Hz FullHD.
    • HDCP 1.4 compliant.
    • Transmission range up to 150M over CAT5e/CAT6.
    • Support SFP optical transceiver, single mode transmission distance up to 60KM.
    • Support Windows based management software, using PC for easy setting input/output link.
    • Support Android/iOS APP for channel select and management.
    • Support IR remote control or front panel button for channel select and management.
    • Support up to 8x16 video wall.
    • Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
    • Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
    • Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
    • RS232 port support external Keypad/Console control. (Custom made available)
    • Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
    • Built in Bi-Directional analog audio transmission (only in unicast mode).
    • Built in Bi-Directional IR extension.
    • HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
    • HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
    • HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
    • Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
    • Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
    • Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
    • Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
    • Option Model: 1U 19” Rack Mounting Panel TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
  • Out of stock

    Features:

    • BNC male to BNC female.
    • Provide protection for HD CCTV, broadcasting devices.
    • SDI transmission rate: 270M ~ 2.97G.
    • Resisting Surge:8KV (Max).
    • Discharging Current:10KA (Max).
    • Reaction Speed:<1nS.
  • Out of stock

    Features:

    • To send HD-SDI video, RS485 data and camera power over one coaxial cable.
    • Allow to use existing RG59 coax cable to upgrade the HD-SDI camera from analog camera.
    • Transmission distance up to 300 meters over RG6U cable
    • Built in RS485 data, application for PTZ camera one way data transmission, transmission speed up to 57600bps.
    • SDIVPR receiver power input support: DC12V to DC58V
    • SDIVPT transmitter and camera power from receiver unit.
    • SDIVPT support camera power up to DC12V/1Amp.
    • POC built in two class surge protection: class I 2KA (8/20uS) , class II 2A (8/20uS)
    • SDI output/input built in 2A 2KA (8/20uS) surge protection
    • Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
    • Support video signal 720p, 1080i, 1080p.
  • Out of stock

    Features:

    • To send HD-SDI video, RS485 data and camera power over one coaxial cable.
    • Allow to use existing RG59 coax cable to upgrade the HD-SDI camera from analog camera.
    • Transmission distance up to 300 meters over RG6U cable
    • Built in RS485 data, application for PTZ camera one way data transmission, transmission speed up to 57600bps.
    • SDIVPR receiver power input support: DC12V to DC58V
    • SDIVPT transmitter and camera power from receiver unit.
    • SDIVPT support camera power up to DC12V/1Amp.
    • POC built in two class surge protection: class I 2KA (8/20uS) , class II 2A (8/20uS)
    • SDI output/input built in 2A 2KA (8/20uS) surge protection
    • Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
    • Support video signal 720p, 1080i, 1080p.
  • Out of stock

    Features:

    • 16 x RJ45 Jack to 16x RJ45 Jack.
    • Application for 16 channel POE hub (Power over Ethernet) protection.
    • 10/100/1000 Base-T CAT5e/CAT5e compatible.
    • Support Mid-Span POE and End Span POE.
    • 802.3af POE compatible.
  • Out of stock

    Features:

    • Protects equipment from high voltage surges from nearby lightning strikes.
    • Special design to protect high data rate network equipments, especially on HDBaseT CAT5e extender or any computer equipments work with network.
    • Support the bandwidth data rate up to 10Gb/s (Max).
    • Built in ESD and lightning protection.
    • Complaint IEC61000-4-2, IEC61000-4-5, IEC1000-4-5.
    • Four pairs protection for wide range of applications: Any TCP/IP Devices, Network, switch hub, PC modem, server, CCTV SYSTEM, IP camera…etc
  • Out of stock

    Features:

    • Performs a different function than grounding requirements.
    • Protects equipment from high voltage surges from nearby lightning strikes.
    • RJ45 Jack to RJ45 Jack.
    • Power and signal line protection.
    • 10/100 Base-T CAT5e/CAT5e compatible.
    • Support Mid-Span PoE and End Span PoE.
    • 802.3af and 802.3at PoE (Power over Ethernet) compatible.
    • Application for PoE (Power over Ethernet) protection.
  • Out of stock

    Features:

    • Protects equipment from high voltage surges from nearby lightning strikes.
    • Perfect for Network, PC modem, server…etc
    • Protects UTP Twisted Pair products or any computer equipment with networking cable.
    • Four pairs protection for wide range of applications: CCTV system, video camera, monitors, multiplexers & Quad processor, VCR, etc.
  • Out of stock

    Features:

    • 24 Port 380W 10/100/1000 Mbps PoE switch
  • Out of stock

    Features:

    • 16 Port 250W 10/100/1000 Mbps PoE switch
  • Out of stock

    Features:

    • 8 Port 120W 10/100 Mbps PoE switch
  • Out of stock

    Features:

    • 4-Port 10/100/1000Mbps with embedded PoE Injector.
    • 1-Port 10/100/1000Mbps for connecting to LAN.
    • Auto-sensing for detecting PoE or non-PoE devices.
    • Compatible IEEE 802.3at PoE standard.
    • 2 units install at TPN002 rack mounting become 8 ports Switch.
    • Internal power supply.
    • Option Model:TRN002 1U 19” Rack Mounting Panel
  • Out of stock

    Features:

    • Splits the higher power over RJ45 Ethernet cable into DC 24V output.
    • Support POE power up to DC24 2.5A (60W) output.
    • Compatible with IEEE802.3af, IEEE802.3at,PoE+, LTPoE++
    • Built in overload and overheat protection.
    • Power input LED indication.
    • Support 10/100/1000 BASE-T transmission rate.
    • Work with IP06I90 POE injector, distance up to 100 meters (Max)
    • Optional model IP04X90 to extender longer distance.
    • Compact metal case for easier installation.
    • Perfect for outdoor PTZ IP camera or long distance application.
  • Out of stock

    Features:

    • Splits the higher power over RJ45 Ethernet cable into DC 12V output.
    • Support POE power up to DC12 5A (60W) output.
    • Compatible with IEEE802.3af, IEEE802.3at,PoE+, LTPoE++
    • Built in overload and overheat protection.
    • Power input LED indication.
    • Support 10/100/1000 BASE-T transmission rate.
    • Work with IP06I90 POE injector, distance up to 100 meters (Max)
    • Optional model IP04X90 to extender longer distance.
    • Compact metal case for easier installation.
    • Perfect for outdoor PTZ IP camera or long distance application.
  • Out of stock

    Features:

    • High Power POE Splitter   30W
  • Out of stock

    Features:

    • High Power POE Injector  30W
  • Out of stock

    Features:

    • Network device at 10/100Mbps speed
    • Automatically detects PoE terminals and supplies inline power
    • Easily install non-PoE device where a power outlet is not available
    • Reduce installation and network equipment costs
    • Safeguards network device with short circuit protection
    • Adjustable DIP switch for 5V, 9V, and 12VDC output
    • Converts Non-PoE devices with Power Over Ethernet Support
    • Auto-sensing power drawn from 802.3af power source equipment(PSE) device
    • Supplies power up to 10 watts
    • Light weight and compact size
  • Out of stock

    Features:

    • Mix Ethernet and power into RJ45 port.
    • IEEE 802.3af Compliant with 10/100Mbps Fast Ethernet
    • Supports PoE power up to 19 Watts for PoE port.
    • Support 10/100 Mbps transmission rate.
    • Distance up to 100 meters (Max)
    • Parallel slide-in design to ease the installation
  • Out of stock

    Features:

    • Extend of both power and data beyond 100 meters.
    • Allow to use multiple repeaters for longer range.
    • No external power required.
    • Compatible IEEE 802.3at POE standard.
    • Auto-sensing for detecting PoE or non-PoE devices.
    • Support 10/100/1000 BASE-T transmission rate.
    • Built in LED status indication.
    • Perfect for long range outdoor POE camera use.
    • Plug and play for easy installation.
  • Out of stock

    Features:

    • Extend of both power and data beyond 100 meters.
    • Allow to use multiple repeaters for longer range.
    • No external power required.
    • Compatible IEEE 802.3af POE standard.
    • Auto-sensing for detecting PoE or non-PoE devices.
    • Support 10/100/1000 BASE-T transmission rate.
    • Built in LED status indication.
    • Plug and play for easy installation.
  • Out of stock

    Features:

    • IP06I90 option model: DC56V 90W power adapter
    • Power Input: AC 90~240V
    • Power Output: DC 56V 1.6A
  • Out of stock

    Features:

    • IP03P option model: DC48V 40W power adapter
  • Out of stock

    Features:

      • Extend POE signal up to 600M, Ethernet or any TCP/IP devices up to 1000M.
      • Ethernet and PoE data over coax or any two wire cables (UTP, telephone, bell, alarm, power cables.
      • Support 10/100 Mbps transmission rate.
      • Power source either from PoE Switch or external DC power adapter option. (order separately)
      • Provides pass-through PoE up to IEEE802.3at 30W.
      • Provides DC12V 1Amp power to camera.
      • Support high power PoE to PTZ cameras at long distances.
      • IP03P Power Source Option Model:
  • Out of stock

    Features:

    • Extender 4 channel IP/POE signal over coax or CAT5e cable.
    • Package includes IP02PH as transmitter connects to 4 port POE camera and IP02D as receiver to connect with network switch or NVR.
    • Transmission distance: 2KM over coax cable, 1.2KM over CAT5e/6.
    • IP02PH 4-Port 10/100Mbps with embedded PoE Injector.
    • IP02PH 1-Port BNC/RJ45 10/100Mbps to send and extend IP/POE camera signal or any TCP/IP devices.
    • Auto-sensing for detecting PoE or non-PoE devices.
    • Compatible IEEE 802.3af PoE standard.
    • IP02PH support external power supply DC48V-DC58V.
  • Out of stock

    Features:

    • To extend IP/POE camera over coax cable.
    • Connects IP/POE camera to 10/100BaseT POE Injector/Switch over one coax cable.
    • Support POE: IEEE 802.3af and IEEE802.3at
    • Support 10/100 Mbps transmission rate.
    • Power source from POE Injector/ POE Switch (order separately)
    • IP01P Power Source Option Model: POE Injector/Switch: IP05I/IP05H/IP06H/IP06I
  • Out of stock

    Features:

    • Send power to remote over unused pairs of 100baseT network cable.
    • Including 2 units/one pair, do not include power adapter.
    • Working distance depends on the power supply, cable type, and powered device.
  • Out of stock

    Features:

    • Extend IP signal and data signal over CAT5e/CAT6 cable.
    • Application as a LAN repeater, to extender IP signal over 100 meters.
    • Application as a signal repeater, to work with UE02, VKM03, HE03, HKM01, HKM01E, model to extend signal over 120 meters.
    • A long range extension could be done by using multiple repeaters.
    • Support 10/100/1000 BASE-T transmission rate.
    • Built in LED status indication.
    • External power required.
    • Plug and play for easy installation.
  • Out of stock

    Features:

        • Extend IP camera signal with power over existing coaxial cable or any two wire cable.
        • Extend Ethernet or any TCP/IP devices up to 1.5Km.
        • Provide IP camera power up to DC12V 1Amp (12W) ,distance up to 500M.
        • Support chainable/ series/star connection up to 4 IP cameras.
        • Support 10/100BASE-T transmission rate.
        • When doing one camera to IP with Power installation, power source could select either from transmitter or receiver .
        • When doing series or star installation to send IP with power, each IP07M need external power adapter.
        • Perfect to upgrade the analog camera system into IP CCTV application.
        • IP07M Power Source Option Model:
      DC48V 40W power adapter: SWP480830 DC56V 70W power adapter: SWP551260
  • Out of stock

    Features:

    • Extend IP camera signal and power together over existing coaxial cable.
    • Provide power to IP camera DC5V or DC12V.
    • Long range transmission up to 500 meters (Max.)
    • Support 10/100BASE-T transmission rate.
    • Perfect to upgrade the analog camera system into IP CCTV application.
    • Plug and play for easy installation.
  • Out of stock
    Features:
    • Send and extend IP camera signal or any TCP/IP devices for long range.
    • Dual cabling solution: allow to use existing coax cable or over CAT5e/6 cable.
    • Distance up to 2KM over coax cable , up to 1.2KM over CAT5e/6 network cable.
    • Plug and play for easy connection.
MENU
DEMO