- Gold-plated RCA connector to screw terminal.
- Passive, no power required.
- Support Dolby® Digital, dts®
- Used in pairs via one CAT5e UTP cable to send digital audio signal up to 180meters.
-
Out of stockFeatures:
-
Out of stock
Features:
- Used in pairs via CAT5e UTP cable to send audio signal up to 600 meters.
- RCA female to 2 pin screw terminal.
- 20Hz to 20Khz Bandwidth.
- Available for 75-120ohm cable.
- Hi Performance to eliminate the audio ground loop interference.
-
Out of stock
Features:
- 1 x stereo audio input via 2xRCAs in parallel connection with wireless BT-input
- 1 x stereo audio input via 3.5mm jack
- 1 x microphone input via 6.3mm jack
- 1 x loop via 3.5mm jack with unit link up to 3units or external amplifier
- 1 x 4-P screw connector for speakers out
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- To send HDCVI /CVBS signal up to 400M over UTP cable.
- To send HD-TVI/AHD signal up to 250M over UTP cable.
- BNC male to screw terminal for easy connection.
- Compact and mini size, could mount multiple units behind multiplexer, Quad, DVR..etc
- Passive, no power required.
- Eliminate coaxial Cable.
- Built in ESD, EFT (impulse noise) and transient protection.
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- To send HDCVI /CVBS signal up to 400M over UTP cable.
- To send HD-TVI/AHD signal up to 250M over UTP cable.
- BNC male to screw terminal for easy connection.
- Compact and mini size, could mount multiple units behind multiplexer, Quad, DVR..etc
- Passive, no power required.
- Eliminate coaxial Cable.
- Built in ESD, EFT (impulse noise) and transient protection
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- Transmit a full color video signal up to 300 meters.
- Distance Up to 1Km when used with an active receiver such as TTA111VH, TTA111VR, TPA008A, TPA016.
- Passive, no power required.
- Eliminate coaxial cable.
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- Transmit a full motion color video signal up to 300 meters.
- Used as a transmitter, the TTP111VLH Weather Proof IP65, has a 25cm Mini coax cable to be suitable install with outdoor camera.
- Used as Receiver, the TTP111VLH compact size is perfect to connect with the image processor, which have multi BNC connections, as like Multiplexer, Quad, DVR …etc.
- Distance Up to 1Km when used with an active receiver such as TTA111AVR.
- Passive, no power required.
- Eliminate coaxial cable.
- Up to multi TTP111VLH can work with 1U rack mounting multi channel receiver panel such as TPP016, TPA016.
-
Out of stock
Features:
- BNC female +2 RCA female to RJ45 female.
- Video and stereo audio transmission over one CAT5e cable.
- Passive, No power required.
-
Out of stock
HD-TVI/AHD/HDCVI
Features:- Transmit HD-TVI/AHD/HD-CVI video and power over one CAT5e cable.
- Include 2 units: 1 x RJ45 to BNC with DC power plug, 1 x RJ45 to BNC with DC power jack.
- Eliminate coaxial & power cable.
- Fast, easy installation, saving time and money.
- Substantial saving on the cost of the cable itself.
- Built in ESD, EFT (impulse noise) and transient protection.
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- Transmit HD-CVI/TVI/AHD video and power over one CAT5e cable.
- Include 2 units: 1 x RJ45 to BNC with DC power plug, 1 x RJ45 to BNC with DC power jack.
- Eliminate coaxial & power cable.
- Fast, easy installation, saving time and money.
- Substantial saving on the cost of the cable itself.
- Built in ESD, EFT (impulse noise) and transient protection
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- Video (one pair) and remote power (2 or 3 pairs) transmission over one 4pairs CAT5 cable.
- Built in AC to DC12V regulated power converter, 1000mA max.
- Built in switch to set unit for “2 pair power through” or “3 pairs power through” mode.
- For DC12V camera use, the power sources convert from TPP016VPD AC24V power for professional CCTV Industry Installation.
- Transmission range up to 300 meters (max.)
- BNC for video, power cord for power, RJ45 female output for video and power.
- Eliminates costly coaxial cables and minimize installation time.
- Use with TPP016VPD for 16 channel video, power over professional CAT5 RJ45 connection.
-
Out of stock
Features:
- TTP111HDPD-RJ45: Male BNC with 2 mini-coax pigtail (DC power plug and 2 bare wire for data)to RJ45 connector.
- TTP111HDPD-RJ45J: Male BNC with 2 mini-coax pigtail (DC power jack and 2 bare wire for data)to RJ45 connector.
- HD-TVI/AHD/HDCVI Video, low voltage camera power, Data (RS485) transmission over one CAT5e cable.
- Max. transmission distance up to 300M.
- Eliminate coaxial & power cable.
- Fast, easy installation, saving time and money.
- Substantial saving on the cost of the cable itself.
- Built in ESD, EFT (impulse noise) and transient protection.
-
Out of stock
Features:
- 4 Channel UTP Video Transceiver, send 4 HD camera signal over one CAT5e/CAT6 cable.
- Choice of RJ45 or push pin terminal inputs/outputs.
- To send HD-TVI, AHD, HDCVI camera 720p/1080p up to 300 meters, 4MP/5MP up to 200 meters over UTP cable.
- Passive, No power required.
- Eliminate Coaxial Cable.
- To work with Active Transmitter TTA111HDT, TTA111TVIT for extra long distance transmission.
- Built in ESD, EFT (impulse noise) and transient protection.
-
Out of stock
Features:
- Built in 16 port passive HD video transceiver in 1U 19” rack mounting panel.
- Choice of 4 x RJ45 or 4 sets x 8 pin removable screw terminal for 16 channel inputs / outputs.
- To send HD-TVI, AHD, HDCVI camera 720p/1080p up to 300 meters, 4MP/5MP up to 200 meters over UTP cable.
- Passive, No power required.
- Eliminate Coaxial Cable.
- To work with Active Transmitter TTA111HDT, TTA111TVIT for extra long distance transmission.
- Built in ESD, EFT (impulse noise) and transient protection.
-
Out of stock
Features:
-
- 16 x RJ45 connector for video input + power output + data output.
- 4 x RJ45 connector for video output, 4 x 8 pin terminal for power input, 1 x 2 pin terminal for data input.
- Built in Surge Protection on Data.
- 16 cameras cable termination panel, use for integrating power, video and data signals onto 4 x RJ45 4 pairs UTP cable.
- Individual power input, could send different power voltage based on camera power consumption and transmission range.
- Use with TTP111VPD-RJ45 video,power, data transceiver at the camera side.
- Use any third-party power supply to power cameras via UTP over (See below “power distance chart”).
- Use with TTP016-RJ45 as video transceiver receiver at control room.
- Perfect cable management solution from the camera to the wiring station, control room.
-
-
Out of stock
16 Port HD-TVI/AHD/HDCVI/CVBS Video,
Features:- TPP016VPD, a CCTV hub, Integrates and sends video and power, data over a single CAT5e cable, transmission distance up to 300 meters.
- Built in switch at each port to set unit for “2 pair power + 1 pair data” mode or “ 3 pairs power” mode.
- Power cameras via 2 or 3 pairs UTP cable for variety distances (please refer to below power distance chart).
- Use with TTP111HDP/ TTP111HDP-L to send video, and AC24V power
- Use with TTP111HDPD-RJ45 to send video, AC24V power, and RS485 data.
- Use with TTP111VPC to send video, and regulated DC 24V power
- 10 Amp AC24V power, each port output current up to 1.1Amp for camera, max up to 10Amp.
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
- Perfect cable management solution from the camera to the wiring station, control room.