Products

Product Features

• Classic 1006 analog FiltAmp module from the '70s
• Authentic reproduction of the circuitry from the "2500" Series
• Consists of a 24 dB transistor ladder low-pass filter followed by a discrete VCA
• Filter cut-off frequency is controlled by external control voltages and by the Frequency control
• 3 external VCF control voltage inputs with variable attenuation respond at 1 V/Octave
• A resonance or "peaked" response at cut-off is adjusted with the Resonance control
• 2 audio signals can be mixed and their relative amplitude adjusted
• VCA accepts the output from the VCF and modifies the output signal level according to the sum of the Gain control and external control voltages
• 2 external VCA control signals can be attenuated by front panel controls
• VCA mode can be selected as either Exponential or Linear
• Eurorack specs: 16 HP, XX mA +12 V, XX mA -12 V

Product Features

• Classic 1016 analog dual noise and random voltage generator module from the '70s
• Authentic reproduction of the circuitry from the "2500" Series
• The module consists of 2 identical white/pink noise and Random Voltage generators
• The noise outputs are generated from 2 independent transistor noise sources
• Filtering of the white noise is used to transform into pink noise and finally a slow random voltage
• 2 output attenuators enable the outputs to be reduced in volume
• White or Pink Noise are selectable via slide switch and LED indication
• Random Voltage can be switched on and off via slide switch with LED indication
• White noise is generated from 5 Hz to 20 kHz and Pink noise is filtered to attenuate the highs and boost the low frequencies resulting in equal energy per octave
• Slow random voltages feature peak signal power between 1 Hz and 10 Hz
• Eurorack specs: 14 HP, XX mA +12 V, XX mA -12 V

Product Features

• Classic 1036 analog dual sample and hold module from the '70s
• Authentic reproduction of the circuitry from the "2500" Series
• Contains 2 independent sample and hold circuits, 2 random noise generators, and 2 voltage-controlled clocks
• Produces random tone sequences, scales and arpeggios
• Audio signal input and output for each Sample and Hold circuit with a sample command input to control the timing of samples from different sources
• Clock Frequency control adjusts the frequency of each clock and the sampling rate
• Manual sample control is available using momentary push buttons
• Sampling can also be controlled externally via a trigger or gate signal using the external input connection
• An internally generated random signal can be used as the sampled signal with an adjustable level control for each circuit
• Eurorack specs: 16 HP, XX mA +12 V, XX mA -12 V

Product Features

• Classic-sounding 1047 analog multi-mode filter and resonator module from the '70s
• Authentic reproduction of the circuitry from the "2500" Series
• Consists of a highly resonant 12 dB state-variable filter capable of proving a wide variety of formant shaping and tonal modulation
• Filter simultaneously provides high-pass, band-pass, low-pass and notch outputs
• Coarse and fine controls adjust the cut-off frequency of the filter from 16 Hz to 16 kHz with 2 external control signal inputs and attenuators
• Resonance (Q) control adjusts the level of the resonant peak from 0 to 512 with an external control signal input and attenuator
• Keyboard percussion feature allows the filter to generate a wide range of percussive sounds
• A keyboard gate signal is connected to the external input with a keyboard CV connected to a frequency control input
• Striking a key will create percussive sounds when the Keyboard Percussion mode is activated
• When the keyboard is released the filter tone damps at a rate determined by Final Q
• Eurorack specs: 16 HP, XX mA +12 V, XX mA -12 V

Product Features

• Pre-assembled ”SYSTEM 15“ modular synthesizer with 16 vintage sounding modules from the ’70s
• 1x 921A OSCILLATOR DRIVER with 2x 921B VCOs and 1x 921 VCO provide you with 3 fully featured voices
• 1x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
• 1x CP35 ATTENUATOR module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
• 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
• 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
• 1x 923 FILTERS module with 6 dB low and high pass filters plus white/pink noise sources
• 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
• 2x 902 VOLTAGE CONTROLLED AMPLIFIERS with 3 summed CV inputs plus dual audio inputs and outputs
• 2x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
• 1x BP56 blank panel allow for expansion space for additional modules such as 960 sequential controller
• 1x BP28 and 1x BP12 blank panels for a total of 96 HP expansion space
• 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
• 1x EURORACK GO case including PSU

Product Features

• Pre-assembled ”System 35“ modular synthesizer with 25 vintage-sounding modules from the ’70s
• 2x 921A OSCILLATOR DRIVER with 4x 921B VCOs and 1x 921 VCO provide you with 5 fully featured voices
• 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
• 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
• 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
• 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
• 2x CP3A-module allows CV mixing and switching for the VCOs with 1 attenuator
• 2x CP3A-M 4 input mixer with master level, 4 outputs, and 2 sets of 4 multiples
• 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples, and reference voltages
• 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
• 3x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
• 3x 902 VOLTAGE-CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
• 1x BP12 and 3x BP2 blank panels for a total of 18 HP expansion space
• 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig, or S-trig outputs
• 1x EURORACK GO case including PSU

Product Features

• Pre-assembled ”SYSTEM 55“ modular synthesizer with 38 vintage sounding modules from the ’70s
• 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
• 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
• 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
• 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
• 5x 902 VOLTAGE CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
• 4x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
• 1x 911A DUAL TRIGGER DELAY module with S-trig input and output
• 2x 921A OSCILLATOR DRIVER with 6x 921B VCOs and 1x 921 VCO gives you 7 fully featured voices
• 1x 960 SEQUENTIAL CONTROLLER module provides up to 24-step sequences in 8 steps with 3 rows
• 1x CM1A MIDI to CV converter enables control by MIDI keyboards or DAW, V-trig or S-trig outputs
• 3x CP3A-O module allows CV mixing and switching for the VCOs with 1 attenuator
• 3x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
• 2x 995 ATTENUATORS modules with 3 linked passive attenuators
• 1x 903A RANDOM SIGNAL GENERATOR module provides dual white and pink noise sources
• 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
• 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
• 1x 962 SEQUENTIAL SWITCH module expands the 960 module into a 24 step sequencer
• 1x BP28, 2x BP56 and 2x BP2 blanks panels for a total of 144HP expansion space
• 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
• 2x EURORACK GO cases including PSUs
• 2x EURORACK GO BRACKETS to link the 2 EURORACK GO cases together for easy patching

Product Features

• Ultra-flexible 90-Watt 3-channel PA System / Keyboard Amplifier
• Powerful 12'' Bugera woofer and custom-made 1'' driver for ultimate sound reproduction
• Integrated digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
• Full 3-channel operation with separate Volume and FX Send per channel
• Additional XLR mic input on Channel 1 for direct connection of dynamic microphones
• Dedicated 5-band graphic EQ for awesome sound shaping
• Line output for direct connection to your mixing console
• Main section with FX Return level and Master Volume
• Subwoofer output for ultimate low-end power
• CD input allows you to play along to your favorite music
• Separate headphone output-perfect for quiet practicing
• Integrated 35-mm pole socket for stand mounting and use as PA System
• 3-Year Warranty Program*
• Designed and engineered in Germany

Product Features

• Bi-amped 600-Watt 4-channel PA System / Keyboard Amplifier
• True bi-amping amplifier design delivers dedicated power for LF and HF drivers
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and light weight
• World-famous, British engineered 12'' Turbosound speaker and 1'' driver
• Ultra-high quality Klark Teknik FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
• Full 4-channel stereo operation with separate Volume and FX Send per channel
• Additional XLR mic input on Channel 1 for direct connection of dynamic microphones
• Dedicated 7-band graphic EQ for awesome sound shaping
• Balanced stereo XLR DI with Ground Lift switch for direct connection to your mixing console
• Main section with FX Return level, Master Volume, Phones level and Shape switch
• Link in- and outputs allow combining two KXD-amps for true stereo operation
• Subwoofer output for ultimate low-end power
• AUX input allows you to play along to your favorite music
• Separate headphone output?perfect for quiet practicing
• 3-Year Warranty Program*
• Designed and engineered in Germany

Product Features

• Classic polyphonic synthesizer with 12 true analog voices for insanely fat and authentic sounds
• 4 simultaneous world-class TC Electronic and Klark Teknik FX with over 30 algorithms including Reverb, Chorus, Flanger, Phaser, Delay and multi-band Distortion
• 12 voices with 2 analog OSCs per voice with oscillator sync mode
• 2 LFOs per voice with 7 waveform shapes, key sync, MIDI sync and envelope auto-triggering
• 3 ADSR generators per voice for control of VCF, VCA and MOD envelopes
• Flexible 8-channel modulation matrix with 19 sources and over 130 destinations including effects parameters
• 32-step control sequencer with adjustable slew rate and MIDI sync
• Full remote control via iPad*/PC/Mac* App over USB, MIDI or built-in WiFi for extended parameter control
• 49 semi-weighted full-size keys featuring velocity sensitivity and after-touch
• Pure analog signal path based on legendary VCF and VCA designs
• OSC 1 generates sawtooth and square/pulse waveforms with pulse width modulation
• OSC 2 generates square/pulse waveforms with tone modulation
• Selectable dual slope 12/24 dB analog low pass filter per voice with adjustable resonance
• Envelope faders seamlessly transform individual envelope segments between linear, exponential and reverse exponential curves
• Powerful unison and poly modes with detune, pan spread and drift parameters featuring up to 12 voices per note
• Global noise generator dramatically expands waveform generation
• Incredible polyphonic portamento with flexible fixed rate, fixed time and exponential pitch glide modes
• Sophisticated arpeggiator with tap tempo button and user configurable pattern modes
• Chord and PolyChord memories enable polyphonic performances from monophonic playing styles
• True bypass mode for pure and high-integrity analog tone
• Global variable 6 dB high pass filter with powerful bass boost switch
• 26 sliders and one switch per function give direct and real-time access to all important parameters
• Spring-loaded pitch and assignable modulation wheels provide total hands-on performance
• LCD Display with encoder, navigation switches and data value slider for rapid menu parameter editing and program selection
• 1024 user program memories with ?compare and match? feature to quickly match all analog controls to values stored in program
• Fully servo-balanced stereo outputs for highest signal integrity
• CV/pedal input for connection to modular systems
• Comprehensive MIDI implementation (including NRPN/CC control of all parameters and bulk load/save)
• Integrated and configurable WiFi client / Access point allows easy and secure connection to home network
• 3-Year Warranty Program*
• Designed and engineered in the U.K.

• Experience true analog delay and vintage slap-back echo that rivals any tape delay
• This Behringer product has been designed to compete head to head with leading products on the market
• Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
• Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
• Status LED for effect on/off and battery check
• Runs on 9 V battery or the Behringer PSU-SB DC power supply (not included)
• First-class electronic On/Off switch for highest signal integrity in bypass mode
• 3-Year Warranty Program*
• Designed and engineered in Germany

Product Features

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
• High-resolution 48 kHz converters for high-end audio quality
• Works with your PC or Mac* computer - no setup or drivers required.
• Stereo Headphone output with dedicated Level control lets you monitor both input and output
• Additional S/PDIF optical output for direct digital conversion
• Powered via USB - no external power supply needed

• Recreate the whole variety of famous fuzz tones of the '60s and '70s
• This Behringer product has been designed to compete head to head with leading products on the market
• 3 different sound modes for classic fuzz, grunge and gain boost
• Dedicated Gain, 2-band EQ and Level controls for awesome sound shaping
• Status LED for effect on/off and battery check
• Runs on 9 V battery or the Behringer PSU-SB DC power supply (not included)
• First-class electronic On/Off switch for highest signal integrity in bypass mode
• 3-Year Warranty Program*
• Designed and engineered in Germany