HD-TVI/AHD/HDCVI/CVBS
Features:
- 3 pin terminal + BNC female to 4 pin terminal + BNC female.
- Max power input AC 40V(MAX), DC 56V(MAX).
- Max current up to 2Amp.
-
Out of stock
-
Out of stock
HD-TVI/AHD/HDCVI/CVBS
Features:- 5 pin terminal (data, power, grounding) + BNC female (video) to 4 pin terminal + BNC female.
- Perfect for PTZ camera protection.
- Max power input AC 40V(MAX), DC 56V(MAX).
- Max current up to 2Amp.
-
Out of stock
16 C
Features:- 16 x BNC male to 16 x BNC female.
- Provide protection for analog HD-CVI, HD-TVI, AHD camera, DVR devices.
- Comply with IEC 61000-4-5.
- Built in EFT (impulse noise) , lightning protection.
- Provide protection for HD DVR or any equipments with multiple video inputs.
hannel HD-TVI/AHD/HDCVI/CVBS
-
Out of stock
Features:
- Add-on mini audio box for all cameras that require an audio function.
- High sensitivity microphone (-65dB) with 45cm power/audio cable.
- Easy to install and ideal for all security surveillance needs.
- DC12V power operation.
-
Out of stock
Features:- Add-on mini audio box for all cameras that require an audio function.
- High sensitivity microphone (-65dB) with 45cm power/audio cable.
- Easy to install and ideal for all security surveillance needs.
- DC12V power operation.
-
Out of stock
FEATURES:
-
- One add-on mini hidden audio board for all cameras which need audio function.
- High sensitive microphone with 50cm power/audio cable.
- Easy to install and ideal for all security surveillance needs.
- DC12V power operation.
-
-
Out of stock
Features:
- IP Extender over Coax - Passive type (2 pieces/one set package)
- Passive, no power required.
- Support 10/100 Mbps transmission rate.
- Transmission up to 300 meters over RG6 coaxial cable .
- Optional Model: IP01H Ethernet Switch with 4Port 10M + 1Port 10/100M
-
Out of stock
Features:
- 4 Port Ethernet Switch with 4 port BNC and 1 port RJ45.
- RJ45 terminal support 10/100Mbps auto detect function
- BNC terminal support 10Mbps, must work with IP01.
- LED indication: Link/Active, Power.
- Complies with standard IEEE802.3 and IEEE802.3u.
- Auto MDI/MDI-X auto cross at RJ45 terminal.
-
Out of stock
-
Out of stock
Features:
- Extend IP camera signal or any TCP/IP devices over existing coaxial cable.
- Send 1 port Analog video signal and 1 port IP video signal over same one coaxial cable.
- Long range transmission up to 500 meters (Max.)
- Support 10/100BASE-T transmission rate.
- Perfect to upgrade the analog camera system into IP CCTV application.
- Plug and play for easy installation.
-
Out of stock
Features:
- To send and extend TCP/IP signal over coaxial cable.
- BNC side maximum transmission distance: 500 meters at 100Mbps, 1000 meters at 10Mbps
- RJ45 side support 10BASE-T, 100BASE-TX, 100BASE-T1 standard.
- RJ45 side maximum transmission distance: 500 meters at 100Mbps, 800 meters at 10Mbps with IP09
- Support Auto MDI/MDI-X.
- Support Full duplex and half-duplex mode.
- Support EEE Energy-Efficient Ethernet.
- BNC side built-in 30KV (ESD) and 30A (Lightning) surge protection.
- RJ45 side built-in 1.5KV (Line to Line) surge protection.
-
Out of stock
Features:- Send and extend IP camera signal or any TCP/IP devices for long range.
- Dual cabling solution: allow to use existing coax cable or over CAT5e/6 cable.
- Distance up to 2KM over coax cable , up to 1.2KM over CAT5e/6 network cable.
- Plug and play for easy connection.
-
Out of stock
Features:
- Extend IP camera signal and power together over existing coaxial cable.
- Provide power to IP camera DC5V or DC12V.
- Long range transmission up to 500 meters (Max.)
- Support 10/100BASE-T transmission rate.
- Perfect to upgrade the analog camera system into IP CCTV application.
- Plug and play for easy installation.
-
Out of stock
Features:
-
-
- Extend IP camera signal with power over existing coaxial cable or any two wire cable.
- Extend Ethernet or any TCP/IP devices up to 1.5Km.
- Provide IP camera power up to DC12V 1Amp (12W) ,distance up to 500M.
- Support chainable/ series/star connection up to 4 IP cameras.
- Support 10/100BASE-T transmission rate.
- When doing one camera to IP with Power installation, power source could select either from transmitter or receiver .
- When doing series or star installation to send IP with power, each IP07M need external power adapter.
- Perfect to upgrade the analog camera system into IP CCTV application.
- IP07M Power Source Option Model:
-
-
-
Out of stock
Features:
- Extend IP signal and data signal over CAT5e/CAT6 cable.
- Application as a LAN repeater, to extender IP signal over 100 meters.
- Application as a signal repeater, to work with UE02, VKM03, HE03, HKM01, HKM01E, model to extend signal over 120 meters.
- A long range extension could be done by using multiple repeaters.
- Support 10/100/1000 BASE-T transmission rate.
- Built in LED status indication.
- External power required.
- Plug and play for easy installation.
-
Out of stock
Features:
- Send power to remote over unused pairs of 100baseT network cable.
- Including 2 units/one pair, do not include power adapter.
- Working distance depends on the power supply, cable type, and powered device.