Features:
- 24 Port 380W 10/100/1000 Mbps PoE switch
-
Out of stock
-
Out of stock
Features:
- Protects equipment from high voltage surges from nearby lightning strikes.
- Perfect for Network, PC modem, server…etc
- Protects UTP Twisted Pair products or any computer equipment with networking cable.
- Four pairs protection for wide range of applications: CCTV system, video camera, monitors, multiplexers & Quad processor, VCR, etc.
-
Out of stock
Features:
- Performs a different function than grounding requirements.
- Protects equipment from high voltage surges from nearby lightning strikes.
- RJ45 Jack to RJ45 Jack.
- Power and signal line protection.
- 10/100 Base-T CAT5e/CAT5e compatible.
- Support Mid-Span PoE and End Span PoE.
- 802.3af and 802.3at PoE (Power over Ethernet) compatible.
- Application for PoE (Power over Ethernet) protection.
-
Out of stock
Features:
- Protects equipment from high voltage surges from nearby lightning strikes.
- Special design to protect high data rate network equipments, especially on HDBaseT CAT5e extender or any computer equipments work with network.
- Support the bandwidth data rate up to 10Gb/s (Max).
- Built in ESD and lightning protection.
- Complaint IEC61000-4-2, IEC61000-4-5, IEC1000-4-5.
- Four pairs protection for wide range of applications: Any TCP/IP Devices, Network, switch hub, PC modem, server, CCTV SYSTEM, IP camera…etc
-
Out of stock
Features:
- 16 x RJ45 Jack to 16x RJ45 Jack.
- Application for 16 channel POE hub (Power over Ethernet) protection.
- 10/100/1000 Base-T CAT5e/CAT5e compatible.
- Support Mid-Span POE and End Span POE.
- 802.3af POE compatible.
-
Out of stock
Features:
- To send HD-SDI video, RS485 data and camera power over one coaxial cable.
- Allow to use existing RG59 coax cable to upgrade the HD-SDI camera from analog camera.
- Transmission distance up to 300 meters over RG6U cable
- Built in RS485 data, application for PTZ camera one way data transmission, transmission speed up to 57600bps.
- SDIVPR receiver power input support: DC12V to DC58V
- SDIVPT transmitter and camera power from receiver unit.
- SDIVPT support camera power up to DC12V/1Amp.
- POC built in two class surge protection: class I 2KA (8/20uS) , class II 2A (8/20uS)
- SDI output/input built in 2A 2KA (8/20uS) surge protection
- Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
- Support video signal 720p, 1080i, 1080p.
-
Out of stock
Features:
- To send HD-SDI video, RS485 data and camera power over one coaxial cable.
- Allow to use existing RG59 coax cable to upgrade the HD-SDI camera from analog camera.
- Transmission distance up to 300 meters over RG6U cable
- Built in RS485 data, application for PTZ camera one way data transmission, transmission speed up to 57600bps.
- SDIVPR receiver power input support: DC12V to DC58V
- SDIVPT transmitter and camera power from receiver unit.
- SDIVPT support camera power up to DC12V/1Amp.
- POC built in two class surge protection: class I 2KA (8/20uS) , class II 2A (8/20uS)
- SDI output/input built in 2A 2KA (8/20uS) surge protection
- Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
- Support video signal 720p, 1080i, 1080p.
-
Out of stock
Features:
- BNC male to BNC female.
- Provide protection for HD CCTV, broadcasting devices.
- SDI transmission rate: 270M ~ 2.97G.
- Resisting Surge：8KV (Max).
- Discharging Current：10KA (Max).
- Reaction Speed：<1nS.
-
Out of stock
Features:
- Extend and distribute HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
- Supports resolutions up to 1080p 60Hz FullHD.
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR extension.
- HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
- HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
- Option Model: 1U 19” Rack Mounting Panel TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
-
Out of stock
Features:
- Extend and distribute 4K HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
- Supports resolutions up to 1080p 60Hz FullHD.
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR extension.
- HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
- HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
- Option Model: 1U 19” Rack Mounting Panel TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
-
Out of stock
Features:
- Extend and distribute VGA or DVI signal with USB, bi-directional RS232/IR(Infrared), and analog audio signals over LAN.
- Supports resolutions up to 1920 x 1200 60Hz (Max)
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR(Infrared) remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR(Infrared) extension.
- VDKM02BT Transmitter unit built in HDMI local loop output.
- VDKM02BR Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
-
Out of stock
Features:
- Extend and distribute VGA or DVI signal with USB, bi-directional RS232/IR(Infrared), and analog audio signals over LAN.
- Supports resolutions up to 1920 x 1200 60Hz (Max)
- HDCP 1.4 compliant.
- Transmission range up to 150M over CAT5e/CAT6.
- Support SFP optical transceiver, single mode transmission distance up to 60KM.
- Support Windows based management software, using PC for easy setting input/output link.
- Support Android/iOS APP for channel select and management.
- Support IR(Infrared) remote control or front panel button for channel select and management.
- Support up to 8x16 video wall.
- Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other automated control system to control devices attached to the extenders.
- Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
- RS232 port support external Keypad/Console control. (Custom made available)
- Built in Bi-Directional analog audio transmission (only in unicast mode).
- Built in Bi-Directional IR(Infrared) extension.
- VDKM02BT Transmitter unit built in HDMI local loop output.
- VDKM02BR Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB 2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
- Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
- Support point to point and multiple source devices to multi-display connections via Gigabit network switch with Unicast or Multicast mode.
- Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of ports on your network switch.
- Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
-
Out of stock
Features:
- 1U Rack Panel For 2 pieces HKM02BT-4K Transmitter
-
Out of stock
Features:
- 1U Rack Panel For 3 pieces HKM02BT Transmitter
-
Out of stock
Features:
- 1U Rack Panel Option for insert 2 x VDKM02BT
-
Out of stock
Features:
- 10 AMP Eight port power supply, AC120V/230V to DC5V Switching regulated output.
- Each port output current 2 Amp (Max).
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.