Features:
- IE01 option model: IR(Infrared) Emitter cable
-
Out of stock
-
Out of stock
Features:
- HE05CR option model: IR(Infrared) Receiver cable
-
Out of stock
Features:
- Four emitter output connections,
- Status power receptacle with LED indicator.
- Power receptacle with LED indicator.
-
Out of stock
Features:
- Four emitter output connections.
- Power receptacle with LED indicator.
- Removable Connector for system connection.
-
Out of stock
Features:
- The RPT-204-2 repeater can provides 6 IR distribution inputs when paralleled with 3 RPT-204-2 systems.
- The Emitter output can run 2 IR blasters.
- The RPT-204-2 is built with an Amplifier circuit for driving IR emitters or high powered IR blasters.
- The RPT-204-2 control distance can provide up to 400M lengths of wire between IR set to RPT-204-2 system when switching NET ON.
- The “ST OUT” can provides a status power from 12 volt trigger output or wall type power supply into a display unit.
- NET Amp circuits can provide better performance for high data rate of IR codes transportation.
-
Out of stock
Features:
- Carrier Frequency: 30K to 60K Hz.
- 2 meter long Infrared sensor cable- acts as a remote receiver and control unit.
- Control Range: 38 KHz up to 30 feet indoor and 56 KHz up to 25 feet indoor on axis, depending on remote strength and ambient interference and 15 to 20 feet in direct sunlight.
- Reception Angle: + / – 45 degree off axis.
- LED display:Activity LED: When IR received the signal form remote controller the Blue LED indicates IR signal activity a completed circuit with a terminator or an Emitter.
- IR lens with black frame is designed to reject visible light interference.
- Room to Room Wire Recommendation: Using 3 - conductor (min.) 24 gauge unshielded solid or stranded copper wire up to 1000 feet (300M) length.
- Power Requirement: DC 12V, (20mA), Using a regulated adaptor is always recommended.
- Dimension: 62(L) x 10(W) x 10(H) mm.
-
Out of stock
Features:
- Carrier Frequency: 30K to 60K Hz.
- 2 meter long Infrared sensor cable- acts as a remote receiver and control unit.
- Control Range: 38 KHz up to 30 feet indoor and 56 KHz up to 25 feet indoor on axis, depending on remote strength and ambient interference and 15 to 20 feet in direct sunlight.
- Reception Angle: + / – 45 degree off axis.
- LED display:Activity LED: When IR received the signal form remote controller the Blue LED indicates IR signal activity a completed circuit with a terminator or an Emitter.
- IR lens with black frame is designed to reject visible light interference.
- Room to Room Wire Recommendation: Using 3 - conductor (min.) 24 gauge unshielded solid or stranded copper wire up to 1000 feet (300M) length.
- Power Requirement: DC 12V, (20mA), Using a regulated adaptor is always recommended.
- Dimension: 62(L) x 10(W) x 10(H) mm.
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- IR(Infrared) transmitting range: 2 feet for the distance of between LED’s facing to the sensors in a line of sight and IR(Infrared) transmitting angle: up to 1 feet for +/– 45 degrees off axis, depending on remote strength and ambient interference.
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- Status Indicator
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- Status Indicator
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- IR(Infrared) transmitting range: 2 feet for the distance of between LED’s facing to the sensors in a line of sight and IR(Infrared) transmitting angle: up to 1 feet for +/– 45 degrees off axis, depending on remote strength and ambient interference.
-
Out of stock
Features:
- Oval shape, with elegant & compact size
- Infrared is built in transparent housing
- With 10 feet cable length
- Color coding wires with 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
- Status Indicator
-
Out of stock
Features:
- IR(Infrared) Emitter with Bare ends tinned E
-
Out of stock
-
Out of stock
Features:
- Dual IR(Infrared) Emitter with Bare ends tinned E
-
Out of stock
Features:
- Four emitter output connections
- Status power receptacle with LED indicator
- Power receptacle with LED indicator
- Removable connector for system connection
- For mounting/adhesive near audio equipment